lauriejop
off to a rocking start
Member since December 2018
Posts: 1
|
Post by lauriejop on Dec 13, 2018 11:56:40 GMT -5
Hi everyone! Looking forward to learning directly from folks who've been there, done that. Been rock hounding and tumbling for about a year and find it difficult to get my questions answered by simply reading a website!
|
|
Tommy
Administrator
Member since January 2013
Posts: 12,594
|
Post by Tommy on Dec 13, 2018 12:44:36 GMT -5
Hi everyone! Looking forward to learning directly from folks who've been there, done that. Been rock hounding and tumbling for about a year and find it difficult to get my questions answered by simply reading a website! Welcome Laurie! Its good to have you here. Jump right in and get your hands dirty and feet wet
|
|
|
Post by MsAli on Dec 13, 2018 12:47:26 GMT -5
Hi and welcome from Fresno Ca
|
|
|
Post by aDave on Dec 13, 2018 13:29:20 GMT -5
Welcome from Southern CA.
|
|
|
Post by Drummond Island Rocks on Dec 13, 2018 14:01:01 GMT -5
Welcome from Michigan. You have come to the right place.
Chuck
|
|
|
Post by Pat on Dec 13, 2018 14:39:48 GMT -5
Welcome from California. I’m not a tumbler, but there are EXPERTS here!
|
|
|
Post by Jugglerguy on Dec 13, 2018 17:01:32 GMT -5
Another welcome from Michigan. I learned everything I know from this site. I don't know much, but I learned it here!
|
|
goatgrinder
spending too much on rocks
Make mine a man cave
Member since January 2017
Posts: 368
|
Post by goatgrinder on Dec 13, 2018 18:37:34 GMT -5
Welcome LauriJop, from chilly Atlanta, Georgia (yes, there are more than one).
We love our tumbling rocks down here and are so glad that you came to join us.
We all just love stories and pictures.
|
|
|
Post by hummingbirdstones on Dec 13, 2018 18:43:42 GMT -5
Welcome to the forum from Northern Arizona!
|
|
|
Post by TheRock on Dec 13, 2018 19:07:47 GMT -5
lauriejop to RTH Forum, from ~Duke in S/W Michigan Welcome Aboard.
|
|
|
Post by vegasjames on Dec 13, 2018 21:08:06 GMT -5
Welcome to the forum.
|
|
rads
spending too much on rocks
Making clay each day!
Member since April 2018
Posts: 318
|
Post by rads on Dec 14, 2018 10:36:57 GMT -5
Another "Hello" from cold, wet and muddy Michigan.
|
|
victor1941
fully equipped rock polisher
Member since November 2011
Posts: 1,959
|
Post by victor1941 on Dec 14, 2018 12:59:32 GMT -5
Welcome from Austin, Tx. My interest is in using the vibe for polishing cabochons that I create and will be one of many to give advice if you ask.
|
|
|
Post by As I in does tries! on Mar 4, 2019 16:40:43 GMT -5
Greetings from Scotland, United Kingdom! I currently have the following Lortone QT12/66 rotary tumbler, Lortone C300 rotary tumbler, 2x Viking Vibrasonic 2x 14lb and 2x 6lb hoppers (Diamond Pacific) (USA) vibrating tumblers, Hans lapidary 6 wheel rock grinder and polisher, 6 inch blade and wheel combo unit that is currently under redevelopment, with Silicon Carbide grit Fixed80, F220, F600, F1200, with Tin Oxide (1.0 micron) and Aluminum Oxide (0.3 micron) polishes. Any questions you may have 1st read the last 20 pages of the subject your are interested in, your question may already been answered just a few threads back, if not then post your question on whatever forum matches your subject, everyone is welcome to look or use my Aussie Lapidary Forum: Rock Tumbling Guide.
|
|