|
Post by billygoattreasures on Dec 29, 2019 5:01:25 GMT -5
Name is James. From Oregon. Stoked to finally join a thread to get some answers on so many questions and frustrations that come up when learning to cut / shape stones! Love every minute of it though! Thanks
|
|
|
Post by knave on Dec 29, 2019 6:29:17 GMT -5
Welcome the the forum.
|
|
|
Post by MsAli on Dec 29, 2019 7:55:14 GMT -5
Hi James and welcome.
|
|
EricD
Cave Dweller
High in the Mountains
Member since November 2019
Posts: 1,142
|
Post by EricD on Dec 29, 2019 8:34:34 GMT -5
Welcome to RTH, James, and hope you have a nice '20
|
|
stonemon
Cave Dweller
Member since January 2017
Posts: 1,024
|
Post by stonemon on Dec 29, 2019 9:56:01 GMT -5
Welcome from a fellow Oregonian!
|
|
|
Post by hummingbirdstones on Dec 29, 2019 10:05:02 GMT -5
Welcome from Northern Arizona!
This is a great thread that was started not too long ago to help out new cabbers. You may find some answers in there. If not, just ask. There are plenty of excellent cabbers on this board to help answer your questions.
|
|
|
Post by opalpyrexia on Dec 29, 2019 10:10:05 GMT -5
Welcome from the Seattle area.
|
|
Fossilman
Cave Dweller
Member since January 2009
Posts: 20,681
|
Post by Fossilman on Dec 29, 2019 10:21:42 GMT -5
Howdy James - From Willamette Valley area, Oregon.....
|
|
|
Post by manofglass on Dec 29, 2019 11:22:43 GMT -5
Welcome to the forum
|
|
|
Post by taylor on Dec 29, 2019 11:25:56 GMT -5
Welcome!
|
|
|
Post by rockjunquie on Dec 29, 2019 12:32:43 GMT -5
Welcome to the board from Virginia.
|
|
|
Post by RocksInNJ on Dec 29, 2019 12:36:23 GMT -5
Welcome from New Jersey.
|
|
|
Post by TheRock on Dec 29, 2019 20:04:21 GMT -5
Jmaes to RTH Forum from ~Duke in SW/Michigan
|
|
NevadaBill
fully equipped rock polisher
Member since January 2019
Posts: 1,332
|
Post by NevadaBill on Dec 31, 2019 10:13:54 GMT -5
Welcome! You have come to the right place for whatever your Questions might be.
|
|
Deleted
Deleted Member
Member since January 1970
Posts: 0
|
Post by Deleted on Jan 2, 2020 9:49:04 GMT -5
Welcome from Georgia !
|
|
|
Post by Pat on Jan 2, 2020 10:47:48 GMT -5
Welcome from California.
|
|
|
Post by As I in does tries! on Jan 5, 2020 20:59:35 GMT -5
Greetings from Scotland on the other side of the pond!
|
|
bquiggle
off to a rocking start
Member since September 2019
Posts: 9
|
Post by bquiggle on Jan 5, 2020 21:07:35 GMT -5
Welcome from one newbe to another, should be a fun ride!
|
|
MommaGem
spending too much on rocks
Member since April 2019
Posts: 312
|
Post by MommaGem on Jan 6, 2020 8:52:05 GMT -5
Welcome from Houston, TX!
|
|
|
Post by billygoattreasures on Dec 6, 2021 2:42:26 GMT -5
Posted this a while back, I’ve been busy and completely forgot it I created an account. So sorry for the late response. I appreciate the welcoming atmosphere. You guys are awesome. I am rebuilding an 18 inch pneumatic hydraulic saw, as far as I know it is homemade being as I can find no markings anywhere on the saw! And can find very little about pneumatic hydraulic saws in general! I was going to make a separate post explaining in more detail, and I still may, But thought I would try this first. If anybody has any experience with pneumatic hydraulic feed saws, would you please reach out, send me a message. I need help diagnosing some issues and configuring all the air and hydraulic lines going through the control lever! The only markings anywhere on the saw are the letters. ROC on the top of rhe control box in the front !! I don’t know if that helps!!?? Thanks in advance!
🙏🙏
|
|