SirRoxalot
freely admits to licking rocks
Member since October 2003
Posts: 790
|
Post by SirRoxalot on Mar 16, 2008 12:24:49 GMT -5
How'd you make those tumbler barrels, and do you like their performance?
SirRoxalot
|
|
|
Post by Jack ( Yorkshire) on Mar 17, 2008 3:55:08 GMT -5
Hi Sir Roxalot,
They are made out of 4" plastic sewer pipe with end stops. (right Mark? )
A bit noisey but work well at the right speed
Jack Yorkshire UK
|
|
|
Post by Original Admin on Mar 17, 2008 8:04:47 GMT -5
Heres how it looks - I should have known it was wearing thin. Yes - they are some kind of pipe with stoppers on - I get them from here www.manchesterminerals.co.uk/acatalog/Tumbling_Machines.htmlThey have different colours - but im pretty sure the brown ones are as Jack says. To get the lids on or off they have to first be immersed in boiling water to soften them - a bit of a bind. Inside the pipes I often stick rubber strips (cut from old car mats) to keep the stones from forming flats as they tend to slip round rather than tumble.
|
|
|
Post by Original Admin on Mar 17, 2008 8:10:53 GMT -5
BikerRandy - I cant be worried with cleaning it up just yet - the other barrels are spinning and thats fine by be - eeek.
|
|
|
Post by MrP on Mar 17, 2008 21:07:14 GMT -5
Mark what I meant was why the board and you were not tumbling at this time. I thought that having the interest to start and run a board you would have to have a deep interest in tumbling and with that much interest I could not understand why you would stop even for a short time. Just curious.........MrP
|
|
|
Post by Original Admin on Mar 18, 2008 4:48:08 GMT -5
Mrp, I just needed a break really - too many rocks everywhere (not good for a baby) too much else going on. Nowhere to tumble as I filled my garage to the door and roof with junk and could hardly get in even. Actually - one of the lesser things to put me off was the mess I made of some Malachite which I couldnt shine and caused green stuff all over the kitchen sink and fouled up all the new barrels id got for the project, not the main reason by a long shot - but it definately put me off a bit. Mark
|
|