thomtap
starting to spend too much on rocks
Member since December 2007
Posts: 237
|
Post by thomtap on Mar 18, 2008 20:07:42 GMT -5
I have started the pre-polish stage with my 4lb Raytech vibe. I had used two teaspoons of rough grit with three teaspoons of water, and it worked well as per instructions. I can't find the instructions, and I'm not sure I'm doing the pre-polish right. I used one teaspoon of pre-polish and spritzed water on the stones pretty good. Should I use less? More? Anyone have the online instruction link???
Thanks! I hope to start polishing in the morning after the pre-polish finishes through the night.
Thom Tapp
|
|
Wolfden
fully equipped rock polisher
Member since November 2007
Posts: 1,368
|
Post by Wolfden on Mar 18, 2008 20:37:28 GMT -5
|
|
thomtap
starting to spend too much on rocks
Member since December 2007
Posts: 237
|
Post by thomtap on Mar 18, 2008 20:55:18 GMT -5
I found the instructions. Thanks for your help! In the Raytech they reccommend 2 tsp of grit or polish all the way through to the end. Three tsp of water in each.
Thom
|
|