|
|
Post by stardiamond on May 14, 2019 14:43:32 GMT -5
I was cab hounding through my Riker boxes and found this piece:  60x35 mm and without the knife edges about 5/32 thick. Very unusual and the pattern is the same front and back. All I can do now is look at it. |
|
|
|
Post by rockjunquie on May 14, 2019 15:33:01 GMT -5
If you drill a hole in it, you can sell it easy for a good price..
|
|
|
|
Post by stardiamond on May 14, 2019 16:44:18 GMT -5
I have plenty of stuff to work on, so this will sit for a while. This is the largest oval that will fit:  Mark the bottom, try to cut evenly, sand and polish the edges and maybe start at 600 for face and back. Except for the knife edges the slab is flat and even. |
|
|
|
Post by fernwood on May 15, 2019 5:09:03 GMT -5
I like it as is. It seems a lot of the coolness will be lost if it is made into an oval.
|
|
|
|
Post by orrum on May 15, 2019 6:04:18 GMT -5
X2 Fernwood! !!
|
|
|
|
Post by stardiamond on May 15, 2019 13:44:22 GMT -5
x3 everyone. Back in the box.
|
|
