Post by glennz01 on Jul 10, 2019 22:14:53 GMT -5
This is a challenge to yourself... What is the best cab that you can create... posting the results of your creation whatever the outcome (just because the cab may not be the best please post anyway and if you like ask for feedback to improve).
Theme- chosen by yours truly as last month's winner: 3d cabs or objects. Cabs that have a 3d top of sorts, spheres, cubes, pyramids or other 3d things that can be made using a crabbing machine. I'll post an example of a 3d cab I've made a while back for a sample down below, basically anything that has a full 3d shape beyond the typical cab made into a cab. Up to 3 side photos of final to show the sides are allowed. If it has other special features see current rules.
Rules:
All hand made cabbing techniques may be used.
Cabs entered must be hand shaped (can be finished in a tumbler but please note if so) and be completed by the last minute of the month in your timezone. They can be started before the month but only finished during the month. You must have 1 photo of ether a preform or slab of the rock. You can enter 1 cab with a up to 3 individual finished piece (not combined) photos of the cab, 2 extra photos will allocated for stones that have color play due to light or fluorescence or equivalent special characteristics (not polish). 1 of the 3 normal photos will be used for voting and if your stone has special characteristics 1 photo from that as well. Please note which photo you would like to use for voting. Voting is a fun way to see what cab folks like the most. Before voting you can change your photos or improve your cab (rework spots especially if you are asking for advice) and place new photos in your original post replacing old photos by the deadline. Please tell an approximation measurement of the legnth / width of the cab.
Finished jewelry cabs may not be entered (unless otherwise specified by the theme). It is OK if there is a hole drilled in the cab without a jump ring, as long as there is no extras on the rock (wire, chord, etc.)
All entries submitted to this contest must be unique to this competition (not submitted in several different competitions). Any duplicates will not be included in the voting list.
Feel free to share with us the story behind your workings or material.
Also, don't forget to include the name of the material.
If a tie occurs in the voting the breaker will be whoever submitted the finished item first.
If there are any questions feel free to ask. Beginners to old timers are welcome.
If you would like feedback (constructive criticism) ask for folks to pm you if they wish to offer tips. If you are new and think your cab isn't too good but its the best you can do post it anyway, getting feedback is how i got to where i am now!
Winner is allowed to chose theme for the month following voting.
Sample of a 3d cab, basically a pyramid with the top cut off on this one.
Theme- chosen by yours truly as last month's winner: 3d cabs or objects. Cabs that have a 3d top of sorts, spheres, cubes, pyramids or other 3d things that can be made using a crabbing machine. I'll post an example of a 3d cab I've made a while back for a sample down below, basically anything that has a full 3d shape beyond the typical cab made into a cab. Up to 3 side photos of final to show the sides are allowed. If it has other special features see current rules.
Rules:
All hand made cabbing techniques may be used.
Cabs entered must be hand shaped (can be finished in a tumbler but please note if so) and be completed by the last minute of the month in your timezone. They can be started before the month but only finished during the month. You must have 1 photo of ether a preform or slab of the rock. You can enter 1 cab with a up to 3 individual finished piece (not combined) photos of the cab, 2 extra photos will allocated for stones that have color play due to light or fluorescence or equivalent special characteristics (not polish). 1 of the 3 normal photos will be used for voting and if your stone has special characteristics 1 photo from that as well. Please note which photo you would like to use for voting. Voting is a fun way to see what cab folks like the most. Before voting you can change your photos or improve your cab (rework spots especially if you are asking for advice) and place new photos in your original post replacing old photos by the deadline. Please tell an approximation measurement of the legnth / width of the cab.
Finished jewelry cabs may not be entered (unless otherwise specified by the theme). It is OK if there is a hole drilled in the cab without a jump ring, as long as there is no extras on the rock (wire, chord, etc.)
All entries submitted to this contest must be unique to this competition (not submitted in several different competitions). Any duplicates will not be included in the voting list.
Feel free to share with us the story behind your workings or material.
Also, don't forget to include the name of the material.
If a tie occurs in the voting the breaker will be whoever submitted the finished item first.
If there are any questions feel free to ask. Beginners to old timers are welcome.
If you would like feedback (constructive criticism) ask for folks to pm you if they wish to offer tips. If you are new and think your cab isn't too good but its the best you can do post it anyway, getting feedback is how i got to where i am now!
Winner is allowed to chose theme for the month following voting.
Sample of a 3d cab, basically a pyramid with the top cut off on this one.
