thankyou
off to a rocking start
Member since January 2020
Posts: 12
|
Post by thankyou on May 16, 2020 19:45:48 GMT -5
Hello . Does anyone know offhand the Lortone LS-18 Spartan belt sizes? Specifically the larger belt ? Please note that this saw is different from the regular ls-18 as it was made before Lortone bought Spartan I beleive . I noticed the newer ls-18 looks very similar though . I am wondering if the belts are the same . Thankyou
|
|
thankyou
off to a rocking start
Member since January 2020
Posts: 12
|
Post by thankyou on May 16, 2020 20:06:19 GMT -5
I will leave this one up for informational purposes . My eyes are getting bad and I used a flashlight to measure it and right where I shined the light I can see it is the same one maybe There was numbers that I needed to clean off alot of dirt ..lucky me .. The regular calls for a 4l-560 . The belt says 4l-560 demco 22 . I only measured 1/2" wide though and 4l560 is 5/8 " .... time for more research . Guess I am thanking myself this time .
|
|
thankyou
off to a rocking start
Member since January 2020
Posts: 12
|
Post by thankyou on May 16, 2020 20:09:32 GMT -5
The 560 is 1/2" woohooo . The one website I was looking at musta been wrong .
|
|
salpal48
starting to spend too much on rocks
Member since March 2015
Posts: 136
|
Post by salpal48 on May 17, 2020 14:08:12 GMT -5
I suggest go to Biedler Belt On the web. Belt Translation 4l=1/2"wide 560 + 56" length in Exterior Circumference It pays to know your belts
|
|
thankyou
off to a rocking start
Member since January 2020
Posts: 12
|
Post by thankyou on May 23, 2020 17:14:59 GMT -5
Updated ... I ordered from Beidlers belts .The spartan takes the same belts as the LS-18 . The shorter one is the 4L440 and the longer one is the 4L560 . I ordered both and they fit fine .
|
|