markymark
Cave Dweller
Member since November 2015
Posts: 349
|
Post by markymark on Jun 25, 2021 17:00:09 GMT -5
Hey guys just thought I would share a cheap way of making a flat lap. 8 inch diamond disk with backed plate or might be called a master lap, mounted with a 1/2 bolt. You can find a way to adapt it to your own drill press. I also used a pump sprayer for my water supply.
|
|
|
Post by jasoninsd on Jun 27, 2021 20:32:08 GMT -5
Way to go Mark! I love seeing these DIY projects!
|
|
|
Post by holajonathan on Aug 2, 2021 2:38:24 GMT -5
Which model Wen drill press did you go with?
|
|
markymark
Cave Dweller
Member since November 2015
Posts: 349
|
Post by markymark on Aug 7, 2021 10:56:53 GMT -5
Wen 4210T, you can go with a smaller press but you will need smaller diamond disks 6inch
|
|
huskeric
spending too much on rocks
Member since May 2016
Posts: 353
|
Post by huskeric on Aug 24, 2021 13:29:24 GMT -5
DANG IT!!! Now I have another thing I can't do without a drill press. That's really clever!
|
|
JR8675309
freely admits to licking rocks
Member since August 2019
Posts: 751
|
Post by JR8675309 on Sept 13, 2021 11:25:56 GMT -5
What is the RPM value in the drill press motor? Thanks!
|
|