|
Post by miket on Oct 7, 2021 17:00:07 GMT -5
If anyone gets bored, would you please look at my website and provide feedback- either publicly or by PM, it doesn't matter to me. I changed out the logo and added pendants, I'm mostly looking for feedback on pricing, the logo, pics, etc... I'm not trying to make sales, just get some tips.
Thanks!
Link:
|
|
|
Post by parfive on Oct 7, 2021 17:21:27 GMT -5
Just asking, Mike . . . All the thumbnails are cropped. Is that intentional?
|
|
|
Post by MsAli on Oct 7, 2021 17:26:26 GMT -5
I'd like to be able to see the whole product in the thumbnail. It's something I struggle at as well. You have a lot of people that are doing wire wrapping to compete with sales so, looking at a few of these, watch the binding spacing and tools marks.
|
|
|
Post by fernwood on Oct 8, 2021 4:14:43 GMT -5
Agree about not having the thumbnails cropped. I would prefer a smaller thumbnail showing the entire piece.
I do like that you added metaphysical properties.
|
|
victor1941
fully equipped rock polisher
Member since November 2011
Posts: 1,978
|
Post by victor1941 on Oct 8, 2021 8:56:33 GMT -5
Is shipping free?
|
|
|
Post by miket on Oct 8, 2021 9:27:51 GMT -5
Just asking, Mike . . . All the thumbnails are cropped. Is that intentional? No, Rich- I can't seem to figure out why it does that. Tela pointed the same thing out a while back. Maybe I'm cropping too close, I'll have to try something different with another and see if I can figure it out. Thanks!
|
|
|
Post by miket on Oct 8, 2021 9:30:16 GMT -5
I'd like to be able to see the whole product in the thumbnail. It's something I struggle at as well. You have a lot of people that are doing wire wrapping to compete with sales so, looking at a few of these, watch the binding spacing and tools marks. Have you been able to figure out a fix?
You're right, there is a lot of competition out there for sure!
It's no excuse, but a lot of those are my earlier wraps...
Thanks for taking the time to look and comment, Ali.
|
|
|
Post by miket on Oct 8, 2021 9:31:29 GMT -5
Agree about not having the thumbnails cropped. I would prefer a smaller thumbnail showing the entire piece. I do like that you added metaphysical properties. Thanks, Beth, I'll have to work on that.
I appreciate you taking the time to look and respond!
|
|
|
Post by miket on Oct 8, 2021 9:32:30 GMT -5
Yes, I decided to do free shipping.
Most of the ones that I've shipped out only cost me three or four dollars to ship so I figured what the heck!
|
|
electrocutus
spending too much on rocks
Member since October 2020
Posts: 331
|
Post by electrocutus on Oct 8, 2021 10:32:47 GMT -5
One thing I noticed is about the navigation. I don't know if this is an option you can control or if "GoImagine" forces your site to behave that way. I was playing around with the site and added a pendant to my cart. I went to see what was in my cart, and then clicked on "Continue Shopping". That brought me back to a "generic" GoImagine shopping page instead of back to your page. GoImagine probably does that to get people look at all of the sellers, but it would be nicer if you could control that and send people back to your own page when they click that button.
You have beautiful pendants!
|
|
|
Post by miket on Oct 8, 2021 11:36:51 GMT -5
One thing I noticed is about the navigation. I don't know if this is an option you can control or if "GoImagine" forces your site to behave that way. I was playing around with the site and added a pendant to my cart. I went to see what was in my cart, and then clicked on "Continue Shopping". That brought me back to a "generic" GoImagine shopping page instead of back to your page. GoImagine probably does that to get people look at all of the sellers, but it would be nicer if you could control that and send people back to your own page when they click that button. You have beautiful pendants! I've noticed that as well, that is something that the site does that I can't control. You're right, though, it sure would be nice. Thank you for the compliment and for looking!
|
|
|
Post by MsAli on Oct 8, 2021 14:09:29 GMT -5
I'd like to be able to see the whole product in the thumbnail. It's something I struggle at as well. You have a lot of people that are doing wire wrapping to compete with sales so, looking at a few of these, watch the binding spacing and tools marks. Have you been able to figure out a fix?
You're right, there is a lot of competition out there for sure!
It's no excuse, but a lot of those are my earlier wraps...
Thanks for taking the time to look and comment, Ali.
Don't take "close-ups" And you're welcome
|
|
|
Post by miket on Oct 8, 2021 14:29:47 GMT -5
Have you been able to figure out a fix?
You're right, there is a lot of competition out there for sure!
It's no excuse, but a lot of those are my earlier wraps...
Thanks for taking the time to look and comment, Ali.
Don't take "close-ups" And you're welcome I meant a fix for seeing the whole piece in the thumbnail... But yeah, I suppose not taking close-ups would eliminate the spacing and tool mark issue!
|
|
|
Post by miket on Oct 8, 2021 14:57:29 GMT -5
|
|
|
Post by MsAli on Oct 8, 2021 15:14:18 GMT -5
Don't take "close-ups" And you're welcome I meant a fix for seeing the whole piece in the thumbnail... But yeah, I suppose not taking close-ups would eliminate the spacing and tool mark issue!
That is the fix for the thumbnail. For some reason when you do a closeup or crop your photo, it gets cut off in the thumbnail
|
|
|
Post by MsAli on Oct 8, 2021 15:15:04 GMT -5
The one you just did looks better.
|
|
|
Post by miket on Oct 8, 2021 15:55:03 GMT -5
The one you just did looks better. Thank you for looking. Oh, and I misunderstood about the fix thing, thanks for that also.
|
|