(SOLD) - mega-slab LFRB, slabs and offcuts and preforms
Nov 30, 2021 14:50:21 GMT -5
catskillrocks, RickB, and 5 more like this
Post by Tommy on Nov 30, 2021 14:50:21 GMT -5
I decided to auction this one because I really don't know where to start with the price. Basically it's a LFRB packed full of stuff slab type stuff I've collected over the years - what the description says, slabs, offcuts, preforms, and everything in between. The first five layers separated with a single layer of cardboard are a variety of slabs. After that the pieces in the milk crate were getting smaller towards the preform size and I was getting bored so I poured the contents of the milk crate in the box until it was overflowing.
Auction is open now and runs till Friday 12/03 at 6pm Pacific time.
Opening bid is $22 to cover my freight cost and the whole roll of shipping tape I used around the outside of the box
Everything you see in the photos is in the box. Here is an index list of all of the photos in case you want to take a closer look.
www.rocktumblinghobby.com/images/slabs-box/
Layer 1 (bottom) - Biggs, Youngite, something, something, something, something lol
Layers 2 thru 5
The milk crate
Pour in progress
Stuffed box
The very last piece put into the box was a rare piece of black and orange Tiffany stone. If it survives the journey it might need a bit of stabilization - the slab I cut this from tended to undercut but made some really gorgeous cabs.
Auction is open now and runs till Friday 12/03 at 6pm Pacific time.
Opening bid is $22 to cover my freight cost and the whole roll of shipping tape I used around the outside of the box
Everything you see in the photos is in the box. Here is an index list of all of the photos in case you want to take a closer look.
www.rocktumblinghobby.com/images/slabs-box/
Layer 1 (bottom) - Biggs, Youngite, something, something, something, something lol
Layers 2 thru 5
The milk crate
Pour in progress
Stuffed box
The very last piece put into the box was a rare piece of black and orange Tiffany stone. If it survives the journey it might need a bit of stabilization - the slab I cut this from tended to undercut but made some really gorgeous cabs.
