herb
spending too much on rocks
Member since November 2011
Posts: 473
|
Post by herb on Mar 22, 2024 9:00:04 GMT -5
I can access the 1st pic and the video, but for the 2nd pic I get a msg I need to request access. Ok. First image shows another modification. Had to apply downward pressure on the barrel to get a good rotation, video shows that. 2nd image shows finished results. The picture doesn't show their true beauty, it is a really bad photo. I'm happy with the results.
image1 video1 image2
|
|
wickedpebbles
off to a rocking start
Member since March 2024
Posts: 14
|
Post by wickedpebbles on Mar 26, 2024 15:46:50 GMT -5
Well I built one! I wasn't happy with the painter bucket design. It was a P.I.T.A. wrapping barrel with the shelf liner material, then I had to cram it in there to get any mediocre rotation. So, back to Lowes with tape measure to find something better. I found a 6" to 4" PVC reducer that has a nice tapered seat that cradles the barrel nicely. First polish run will be done Thursday. Hope this helps anyone.
The lining was just a day one solution. I glued a ring of rubber inside the bucket and the barrel just drops in. The fit is tight, and secure. Much faster rock rotation
|
|
oblina
off to a rocking start
Member since April 2024
Posts: 3
|
Post by oblina on Apr 8, 2024 12:22:55 GMT -5
Just super impressed with your creativity and sharing your creation via YouTube. I was able to procure a reasonably priced Lot O tumbler single barrel from arrowhead lapidary supply. Sure do appreciate the parts list too.
|
|
Fossilman
Cave Dweller
Member since January 2009
Posts: 20,722
|
Post by Fossilman on Apr 8, 2024 12:46:52 GMT -5
Awesome build! I got lucky and found a double Lot-O at Shawns in SD a few years ago. It still sits in the box... But it's here.. Let us know the test results on the material it does..
|
|