lacami
starting to shine!
Member since April 2013
Posts: 28
|
Post by lacami on May 1, 2013 15:47:38 GMT -5
So very pretty, these...!
May I inquire as how you tumble them, how long in each step and with what grit/polish? (Always curious...)
|
|
|
Post by phil on May 1, 2013 17:34:33 GMT -5
Hi. Nice batch. What do you mean when you say capped? Got a pic?
|
|
|
Post by Bikerrandy on May 5, 2013 19:07:51 GMT -5
|
|
|
Post by talkingstones on May 6, 2013 6:55:45 GMT -5
Inspirational!!! Thanks for pulling this up, Randy!!! I'm guessing you preformed all and then did the vibe thing. Thoughts on the bell caps... would it be easier than drilling? Also, do you know anything about drilling prior to polishing? I'm thinking that would be the better way to do it.
|
|
|
Post by phil on May 6, 2013 11:18:19 GMT -5
Thanks!
|
|
|
Post by Hard Rock Cafe on May 6, 2013 15:13:50 GMT -5
Randy is the master at these. I think bell caps are the only way to go on this kind of volume. Who has time to drill that many pendants?
Chuck
|
|
|
Post by Bikerrandy on May 10, 2013 13:47:45 GMT -5
Chuck is right. It takes about 10 minutes per hole if you drill since you gotta go slow or you'll crack the top right off the stone. The key to making money is to shorten the work time. Time is money!!
|
|