Jasper-hound
starting to spend too much on rocks
Member since June 2010
Posts: 208
|
Post by Jasper-hound on Jun 24, 2012 14:41:22 GMT -5
Those cinch mountings work very well. I actually prefer the ones from Tripps over Rio Grandes, having ordered from both. The Tripps ones are pricier but beefier. The cab just needs to taper down on the edges, so as long as you are not big on girdles, your cabs will do fine!
|
|
|
Post by tntmom on Jun 24, 2012 14:57:42 GMT -5
Those cinch mountings work very well. I actually prefer the ones from Tripps over Rio Grandes, having ordered from both. The Tripps ones are pricier but beefier. The cab just needs to taper down on the edges, so as long as you are not big on girdles, your cabs will do fine! Thanks for the tip! I do have a girdle but it's beveled in towards the dome at probably around 70 to 80 degrees. Will that still work for the cinch mounts?
|
|
|
Post by susand24224 on Jun 24, 2012 15:41:44 GMT -5
Krystee, that cab is absolutely incredible. It's the cleanest material I've seen, and your cab, as always, shows it to perfection.
|
|
Jasper-hound
starting to spend too much on rocks
Member since June 2010
Posts: 208
|
Post by Jasper-hound on Jun 24, 2012 18:13:37 GMT -5
yes, as long as as there is a good angle pointing toward the dome, it should hold.
|
|
|
Post by roy on Jun 25, 2012 0:16:24 GMT -5
super job on those
|
|
jason12x12
freely admits to licking rocks
Member since October 2011
Posts: 798
|
Post by jason12x12 on Jun 25, 2012 2:33:37 GMT -5
nice cab as always
|
|
bgast1
fully equipped rock polisher
Member since July 2010
Posts: 1,076
|
Post by bgast1 on Jun 25, 2012 18:29:54 GMT -5
That is one beautiful cab, Krystee!!
|
|
carleton
spending too much on rocks
Member since April 2012
Posts: 277
|
Post by carleton on Jun 28, 2012 1:27:02 GMT -5
Yes!
Now that is how you cab Labradorite, very very nice!!
Carleton
|
|
borock
starting to spend too much on rocks
Member since April 2011
Posts: 225
|
Post by borock on Jun 29, 2012 12:16:57 GMT -5
Now thats class.
|
|
|
Post by rockjunquie on Jun 29, 2012 13:29:12 GMT -5
Beautiful! (and what everyone else said )
|
|
|
Post by tntmom on Jun 29, 2012 21:02:14 GMT -5
Thanks again ;D
Got my cinch mounts..... thinking I might have grinded it a little too small. I've seen pictures and the top loop never touches. I don't want to risk it being too loose so...... guess I'm doing some silver wire wrapping this weekend! I'm lazy and didn't want to wrap it but..... I know my Mom would prefer a wrap anyways so stay tuned.......
|
|
|
Post by 3rdrockfromthefun on Jun 30, 2012 11:00:18 GMT -5
Can't wait to see - I seem to recall your wrapping skills are as mad as your cabbing skills.
|
|