jamesp
Cave Dweller
Member since October 2012
Posts: 36,562
|
Post by jamesp on Feb 23, 2016 7:05:35 GMT -5
Your reduction and tumbling process is bang on. Sounds like you had a fast follow-thru on your hammer. Hammer speed does help me, but I am not practiced with a chisel. Looks like you have a fine method.
Sounds like you used a rotary to achieve the prefect polish. Hats off to you on that task. Before the vibe came along I noticed long runs(up to 3 weeks) in polish did the shine trick. And 2 weeks each in 500 and 1000. But the polish seemed to improve each week until after the 3rd week. It was the grueling step. Patience tester.
|
|