|
|
Post by kk on Jun 27, 2017 4:35:57 GMT -5
Have/had 3choices on the table for the challenge here. Fluorite, Soapstone and Chinese Pietersite. Broke the fluorite apart only to find singular colour pieces, so no go! Did not like the colour of the soapstone either, so going with the Pietersite. End-cut/ Cutt-off, contains all the flaws that Chinese material throws at you (dirt-pokets, loose fibers, quartz in places, etc...). But as this is a "Freeform" challenge, ideally suited for here, I think. Preform Now off to sanding, and hopefully polish before time is up. Best regards, Kurt
|
|
barclay
has rocks in the head
Lowly Padawan of rocks
Member since November 2011
Posts: 510
|
Post by barclay on Jun 27, 2017 9:05:06 GMT -5
Interesting agate / chalcedony mix don't know where it is from I picked in up in an old collection last year. just let the end cut be the basis for the shape after removing some of more porous material. It looks like stuff I collected in Kramer Junction, CA.
|
|
rivarat
starting to spend too much on rocks
Member since June 2016
Posts: 140
|
Post by rivarat on Jun 28, 2017 1:00:10 GMT -5
It looks like stuff I collected in Kramer Junction, CA.
If it is, its now a long way from home now residing in Australia.
|
|
gemfeller
Cave Dweller
Member since June 2011
Posts: 4,059
|
Post by gemfeller on Jun 29, 2017 17:10:18 GMT -5
I'd planned an entry for this month but an injury to my hand has made it impossible for me to do any cutting for a while. Good luck to all contestants. Hope to be back with a cab next contest.
|
|
|
Post by glennz01 on Jul 8, 2017 20:41:30 GMT -5
Have/had 3choices on the table for the challenge here. Fluorite, Soapstone and Chinese Pietersite. Broke the fluorite apart only to find singular colour pieces, so no go! Did not like the colour of the soapstone either, so going with the Pietersite. End-cut/ Cutt-off, contains all the flaws that Chinese material throws at you (dirt-pokets, loose fibers, quartz in places, etc...). But as this is a "Freeform" challenge, ideally suited for here, I think. Preform Now off to sanding, and hopefully polish before time is up. Best regards, Kurt Kurt, Please upload a new photo and i will include it of the final product
|
|