|
|
Post by miket on Apr 30, 2019 16:09:12 GMT -5
Finished grinding the above, here's what I came up with. A little bit fewer vugs, some brighter reds, a little less of the orange- I would have liked it to have ended up with some more of the orange but the rock wants what it wants.  Anyway, into the rotary it goes. Thanks for looking!  |
|
|
|
Grrrr
Apr 30, 2019 16:17:04 GMT -5
Post by stardiamond on Apr 30, 2019 16:17:04 GMT -5
I see an exceptional cab from a recut. Draw a line from the left edge of the white past the right shiny spot and arc it toward the bottom. Work out a shape that pleases you.
|
|
|
|
Grrrr
Apr 30, 2019 16:37:15 GMT -5
Post by miket on Apr 30, 2019 16:37:15 GMT -5
I see an exceptional cab from a recut. Draw a line from the left edge of the white past the right shiny spot and arc it toward the bottom. Work out a shape that pleases you. Basically that would remove those larger vugs on the right side... I might just do that, thanks. |
|
|
|
Grrrr
Apr 30, 2019 16:42:58 GMT -5
miket likes this
Post by stardiamond on Apr 30, 2019 16:42:58 GMT -5
For a piece of material that a person likes, it is typical to try to make the largest cab possible. I've done that many times over the years. Bigger is not always better.
|
|
