|
Post by TheRock on Jan 3, 2020 4:25:23 GMT -5
The Only True way to compare the loudness in decibels of a Tumbler is to factor in its capacity per pound. A Larger Capacity Tumbler should produce more noise right? Well maybe that Isn't the case.
|
|
jimaz
spending too much on rocks
Member since July 2018
Posts: 461
|
Post by jimaz on Jan 3, 2020 13:09:41 GMT -5
Very interesting. Thanks for the report.
|
|
|
Post by knave on Jan 3, 2020 20:01:05 GMT -5
TheRock does the uv shine the ricks as well as the loto?
|
|
|
Post by TheRock on Jan 3, 2020 22:10:33 GMT -5
|
|
|
Post by knave on Jan 3, 2020 22:25:27 GMT -5
Very good. Yes I must admit I was curious which tumbler you had used, as you have both.
|
|
|
Post by RocksInNJ on Jan 4, 2020 0:36:10 GMT -5
Well done sir. I didn’t think there was much difference in the noise levels from your last comparison video, but this just goes to prove it. Who would’ve ever guessed that the bigger, the quieter?
|
|
EricD
Cave Dweller
High in the Mountains
Member since November 2019
Posts: 1,142
|
Post by EricD on Jan 4, 2020 0:48:40 GMT -5
per pound. anyway... I could sledge hammer rocks all day in the room next to you, but if it only took me 2 hours a day instead of 12, your head would still hurt when I was done
|
|
EricD
Cave Dweller
High in the Mountains
Member since November 2019
Posts: 1,142
|
Post by EricD on Jan 4, 2020 1:22:38 GMT -5
So, which one reaches the best shine first? Noise wise
|
|
|
Post by TheRock on Jan 4, 2020 2:21:18 GMT -5
per pound. anyway... I could sledge hammer rocks all day in the room next to you, but if it only took me 2 hours a day instead of 12, your head would still hurt when I was done You should hear the Decibel Level when all 15 of them are sounding off. The noise would be in the RED PART of that meter.
|
|
|
Post by TheRock on Jan 4, 2020 2:25:20 GMT -5
So, which one reaches the best shine first? Noise wise That I do not know. And I'm not into splitting hairs.
|
|
|
Post by knave on Jan 4, 2020 4:58:19 GMT -5
I just want to make a vibe with an old refrigerant tank and an evap fan motor. Bet I could peg that meter, lol.
|
|
|
Post by knave on Jan 4, 2020 11:54:32 GMT -5
I have gazillions of old tanks and spare evap motors. Bungee to bench, braze a motor on each side of tank and let er rip. Imma gonna try it.
|
|
|
Post by TheRock on Jan 4, 2020 13:52:18 GMT -5
I have gazillions of old tanks and spare evap motors. Bungee to bench, braze a motor on each side of tank and let er rip. Imma gonna try it. You have my best wishes and Good Luck. I don't see any reason for improvement with the equipment I have. If the 15 tumblers I have wont do it, maybe I need to look inwards at the Operator and see what he is doing. wrong.
|
|
|
Post by knave on Jan 4, 2020 13:59:01 GMT -5
I have gazillions of old tanks and spare evap motors. Bungee to bench, braze a motor on each side of tank and let er rip. Imma gonna try it. You have my best wishes and Good Luck. I don't see any reason for improvement with the equipment I have. If the 15 tumblers I have wont do it, maybe I need to look inwards at the Operator and see what he is doing. wrong. Trust me if I had 15 tumblers, I wouldn’t be messing around with homemade either!!!
|
|
|
Post by TheRock on Jan 4, 2020 16:38:24 GMT -5
You have my best wishes and Good Luck. I don't see any reason for improvement with the equipment I have. If the 15 tumblers I have wont do it, maybe I need to look inwards at the Operator and see what he is doing. wrong. Trust me if I had 15 tumblers, I wouldn’t be messing around with homemade either!!! Most people don't need that many and probably have way more patience than me. I didn't need 40 Wheel Horse Tractors either But Just call me Oakey Overkill I have one speed and that is M A X I M U M O V E R D R I V E. Love me or Hate me that's just the way I roll.
|
|
|
Post by knave on Jan 4, 2020 21:10:21 GMT -5
Hard to beat free! We’ll see what happens.
|
|
|
Post by RocksInNJ on Jan 4, 2020 23:20:02 GMT -5
Best of luck knave. Watch out for flying debris.
|
|
|
Post by TheRock on Jan 4, 2020 23:38:33 GMT -5
Hard to beat free! We’ll see what happens. OK Fellow Brother Pipefitter I Gotta pass on some of my infinite Wisdom to you. Its never going to work right using Tetrafluoroethane Cylinder you should be using a Trifluoromethane Cylinder to get things shakin!
|
|
|
Post by knave on Jan 5, 2020 0:36:36 GMT -5
I forgot to put on a coat it got cold out there. Dirty rough river pebbles for test run:
|
|
|
Post by knave on Jan 5, 2020 0:39:10 GMT -5
I have about 1 hour into it so far. Had to do dad things and deal with the 4 yo. Enough thread hijacking, I will start a new thread if needed. Thank you TheRock
|
|