|
|
Post by perkins17 on Mar 28, 2022 19:39:47 GMT -5
I picked up a never used Raytech 6 inch saw on friday, and didn't get around to posting pictures. Here is is:  IMG_20220325_195335691 by Perkins17, on Flickr  IMG_20220325_195326176 by Perkins17, on Flickr  IMG_20220325_195420708 by Perkins17, on Flickr  IMG_20220325_195432023 by Perkins17, on Flickr That's the saw... any tips on how far to mount the motor from it? I'm also looking for tips on the motor rewire. Mine didn't come with a wiring diagram, so I need some help there. It's a 1/3 horsepower, 1725 rpm, Emerson electric motor. Thank you for everyone in my prior thread who helped me make the decision to get the saw.  IMG_20220325_195452015 by Perkins17, on Flickr Any idea what these are? They came with the saw, and I was told they are motor mounts, but I don't know. Finally, some goodies I picked up at the big show on Fri. Sat. Sun.  IMG_20220325_183538843 by Perkins17, on Flickr After all, I do have to have something to cut on my new saw, right??  |
|
|
|
Post by jasoninsd on Mar 28, 2022 20:14:50 GMT -5
It's about time you posted pics of this little beast! LOL I'm glad to see you already started breaking it in!  You have a slab of one of my favorite materials...that Pinolith!!  |
|
|
|
Post by hummingbirdstones2 on Mar 28, 2022 20:16:46 GMT -5
Good to see photos of your saw. I found a photo showing one on the original base plate with all the accessories. Here's the link:
You can set the motor back as far as you want, but looks like the factory location was just an inch or two behind the back edge of the table.
|
|
|
|
Post by perkins17 on Mar 28, 2022 20:17:38 GMT -5
It's about time you posted pics of this little beast! LOL I'm glad to see you already started breaking it in! You have a slab of one of my favorite materials...that Pinolith!! I'll say it was! I was away from it all weekend too... I'll bet you can guess where my mind was at... The garage putting it together!  |
|
|
|
Post by perkins17 on Mar 28, 2022 20:19:18 GMT -5
Good to see photos of your saw. I found a photo showing one on the original base plate with all the accessories. Here's the link:
You can set the motor back as far as you want, but looks like the factory location was just an inch or two behind the back edge of the table.
Thank you for sharing the link. It's good that I don't need to pick up a bigger baseboard! That's really helpful. I appreciate it. |
|
|
|
Post by jasoninsd on Mar 28, 2022 20:19:51 GMT -5
It's about time you posted pics of this little beast! LOL I'm glad to see you already started breaking it in!  You have a slab of one of my favorite materials...that Pinolith!!  I'll say it was! I was away from it all weekend too... I'll bet you can guess where my mind was at... The garage putting it together!  A case of physically being in one place while mentally in a completely different location! LOL |
|
|
|
Post by perkins17 on Mar 28, 2022 20:21:39 GMT -5
I'll say it was! I was away from it all weekend too... I'll bet you can guess where my mind was at... The garage putting it together! A case of physically being in one place while mentally in a completely different location! LOL Couldn't have said it better myself! |
|
catskillrocks
fully equipped rock polisher
Member since July 2008
Posts: 1,270
|
Post by catskillrocks on Mar 28, 2022 20:54:51 GMT -5
A real nice purchase Perkins. I like that
you got some goodies to feed it too.
|
|
|
|
Post by perkins17 on Mar 28, 2022 21:22:29 GMT -5
A real nice purchase Perkins. I like that you got some goodies to feed it too. Thank you! Yeah, I figured I'd better stock up, you know, just in case... |
|
rockbrain
Cave Dweller 
Member since January 2022
Posts: 3,178
Member is Online
|
Post by rockbrain on Mar 29, 2022 19:09:07 GMT -5
Can you post a picture of the wiring compartment of the motor?
|
|
|
|
Post by beefjello on Mar 29, 2022 19:36:33 GMT -5
Congrats, that's a nice lookin' saw!  Now git 'er dirty!!  |
|
|
|
Post by perkins17 on Mar 29, 2022 20:35:56 GMT -5
Congrats, that's a nice lookin' saw! Now git 'er dirty!! Will do! It's too dang pretty -it sure ain't right! |
|
