4wla
off to a rocking start
Member since December 2023
Posts: 3
|
Post by 4wla on Dec 3, 2023 22:33:04 GMT -5
|
|
4wla
off to a rocking start
Member since December 2023
Posts: 3
|
Post by 4wla on Dec 3, 2023 22:55:58 GMT -5
|
|
|
Post by catmandewe on Dec 3, 2023 23:32:48 GMT -5
I have one that is very similar, but these are for sure home made.
Tony
|
|
|
Post by Rockoonz on Dec 4, 2023 12:09:17 GMT -5
That one is definitely home made, I believe I have seen one with Covington parts on it before, might have been a kit.
|
|
|
Post by Peruano on Dec 4, 2023 13:43:39 GMT -5
With such a large pulley on the saw arbor, it seems it would have a terribly slow rpm. It's hard to tell but it seems that the tank bottom is sloped with the deepest part of the well under the blade. I seem to recall a couple of commercial saws that used that idea to reduce oil requirements. It looks like the vice would take a big rock.
|
|
4wla
off to a rocking start
Member since December 2023
Posts: 3
|
Post by 4wla on Dec 4, 2023 19:12:01 GMT -5
Thanks for everyone's help. The tank does slope down with the deepest part under the blade. I'm not sure how it wound up here in Texas, but it just looked like such a cool machine I ended up buying it at an auction. Is there any value in it?
|
|