hobopuppy
starting to spend too much on rocks
Member since August 2007
Posts: 115
|
Post by hobopuppy on Nov 28, 2007 15:00:29 GMT -5
How can I get my leather to hold? I've got 1/2-3mm leather cords. I tried to glue on end caps like these www.firemountaingems.com/details.asp?PN=H201880FD using the glue E6000. I know it's strong glue and after letting it set for 48 hours I still was able to pull the end cap off without much trouble. Then when I tried to tie the leather cord as tight as I could I was still able to pull it apart. I want to use the leather cord but I can't get it to stay attached to the end caps or stayed tied. Any suggestions since I've got a lot of leather cord that I would like to use? Thanks, Stacey
|
|
|
Post by Jurrasic Jonje on Nov 28, 2007 18:22:12 GMT -5
Take some wire and coil it to fit over the leather cord then pinch one end to the leather. Loop the other end around your findings. That is how I make mine. Here is a pic.
|
|
|
Post by creativeminded on Nov 29, 2007 10:03:52 GMT -5
|
|