greenjock
off to a rocking start
Aut Pax Aut Bellum
Member since October 2007
Posts: 17
|
Post by greenjock on Oct 31, 2009 14:13:34 GMT -5
Do any of you guys have any spare saw parts for sale? this would help me complete a project I am working on. I anyone can help I can only pay through Paypal. The main parts I am trying to source are the workings for driving a vice feed. their are some of the items pictured here that I wish to source, Phosphur Bronze drive wheel with a convex edge for driving the screwed rod on which the vice would travel. The wheel I have photographed measures 8cm diameter and 0.5 cms thick. a screwed shaft is driven by the main motor, then the screws drive the convex wheel which in turn drives a second screwed shaft on which the vice carriage moves along.
|
|
|
Post by Jack, lapidaryrough on Oct 31, 2009 15:32:06 GMT -5
Here in the U.S. we have a lot of dealer`s for the parts you need. I`m sure in your area you can fine the Bull Gear & Worm drive locally. Their stock part`s / standard made. Can`t tell what saw you have though. The Bull gear i see has a lot of teeth on it. On my 24" Frantom Saw made in 1959 the Bull Gear has 93 teeth, and the worm drive is a WH-16 to match bull gear that is press onto the threaded dive shaft for the screw feed. This link i deal buy a lot of my Brain storm`s through. www.applied.com/base.cfm?page_id=1501 I sure you can match your part their. Jack
|
|
Old Hickory
having dreams about rocks
Member since March 2006
Posts: 67
|
Post by Old Hickory on Nov 1, 2009 0:33:33 GMT -5
|
|