|
Post by jakesrocks on Sept 10, 2010 16:37:58 GMT -5
I didn't know where else to post this, so here goes. Does anyone need the instruction sheets for a GY - ROC model A ? While digging through a bunch of instruction manuals, I came across the original instructions for a machine I no longer have. If anyone needs these things, let me know and I'll send them to you.
Don
|
|
docharber
has rocks in the head
Member since October 2008
Posts: 693
|
Post by docharber on Sept 14, 2010 22:40:58 GMT -5
YES!!! I just bought a used machine and was trying to get a manual online but couldn't find Tagit's site if they have one. I'd loveto have the manual. Please let me know how I can repay postage costs...THANKS! PM sent w/ address
Mark H.
|
|
|
Post by jakesrocks on Sept 14, 2010 22:46:40 GMT -5
No problem on the postage. Just hate to throw things like that away. Glad you can use it. Don
|
|
|
Post by johnjsgems on Sept 15, 2010 0:06:48 GMT -5
Tagit has no website, no e-mail, no credit cards. The current instructions are a back to back one page sheet with metal polishing on one side and rock polishing on the other. Biggest tip is always run it full. Light loads cause the suspension springs to break. Their number is 562-496-7742. Lionel will answer questions happily but only works Mon-Thurs and 10-3 or so Pacific Time.
|
|
|
Post by jakesrocks on Sept 15, 2010 13:04:04 GMT -5
More good info for you from John. I have an old bill from Taggit for replacement springs dated 11/18/89. Shows you how long those instructions have been stuck away in a folder. ( Did I hear someone say packrat )? There were 5 pages in the old instructions, + a spare parts page. Don't know what new springs cost now, but they were $12.00 a set back then. Don
|
|
|
Post by johnjsgems on Sept 16, 2010 0:08:14 GMT -5
Set with grommets are now $16. They ship the back to back page, a "catalog", and price list now.
|
|
docharber
has rocks in the head
Member since October 2008
Posts: 693
|
Post by docharber on Sept 18, 2010 16:12:17 GMT -5
I appreciate the additional information. I understand it's a good idea to run any vibe near full.
Mark H
|
|
|
Post by jakesrocks on Sept 18, 2010 16:32:38 GMT -5
Hey Mark, I'll try to make it ti the P.O. on Monday with those instructions for you. Don
|
|