minerken
Cave Dweller
Member since August 2013
Posts: 466
|
Post by minerken on Oct 22, 2017 17:31:57 GMT -5
Power nibbler www.micromark.com/Power-Nibbler I'm not a smith but I have seen these and wonder if they work for cutting silver sheet for jewelry. They say they are essentially burr free.
|
|
|
Post by Pat on Oct 22, 2017 19:05:26 GMT -5
Says it cuts sheet metal, but not specific. Would be handy if it could cut suitable metal.
|
|
|
Post by fantastic5 on Oct 22, 2017 20:03:20 GMT -5
Says it cuts sheet metal, but not specific. Would be handy if it could cut suitable metal. Hard to say for sure, but from the pictures it looks like it wastes a good bit in the cut line. The straight edge would be nice for making bezel wire, however.
|
|
|
Post by toiv0 on Oct 23, 2017 6:11:20 GMT -5
Looks pretty cool, be interested to see it in action
|
|
|
Post by toiv0 on Oct 23, 2017 6:52:25 GMT -5
|
|
|
Post by TheRock on Oct 23, 2017 21:06:21 GMT -5
I too would like to see that tool in action. I did a search on youtube but NO SOAP! ~Duke
|
|
minerken
Cave Dweller
Member since August 2013
Posts: 466
|
Post by minerken on Oct 24, 2017 9:34:47 GMT -5
I too would like to see that tool in action. I did a search on youtube but NO SOAP! ~Duke I looked too and no luck on the mini nibbler but lots on the larger commercial one used on heavy sheet metal
|
|