alrocker
off to a rocking start
Member since May 2018
Posts: 5
|
Post by alrocker on May 24, 2018 16:43:00 GMT -5
I am researching the possibility of building a 6 wheel machine I found this web site www.baltic-abrasives.com/en/ does any body have any review or feed back on this companies products ?
|
|
alrocker
off to a rocking start
Member since May 2018
Posts: 5
|
Post by alrocker on May 24, 2018 16:48:56 GMT -5
|
|
|
Post by rockjunquie on May 24, 2018 18:56:39 GMT -5
|
|
alrocker
off to a rocking start
Member since May 2018
Posts: 5
|
Post by alrocker on May 25, 2018 20:15:17 GMT -5
I believe it is !
|
|
bmw2002
starting to shine!
Member since April 2017
Posts: 34
|
Post by bmw2002 on Jun 8, 2018 17:57:44 GMT -5
I ordered, through e bay a 280 soft wheel, to remove scratches generated from my 220 grinding steel wheel . This was several months and cabs ago. Still working fine, but of course it is starting to give up the ghost. I cannot complain. I am going see how long the wheel will perform, but I am pretty sure that I am going to get some of the Rez wheels in various mesh. Takes awhile to break in, with agate, etc, but after that will work longer, I hope. Darius gave me some good advice about the break in period of the Rez wheels, and what to use. You can e mail him directly about any concerns you may have @ darius@baltic-abrasives.com. I do not know if he ships direct outside of e bay, but you can see. Maybe at a direct sale price?? I don't know.
|
|