vayank5150
starting to spend too much on rocks
Member since January 2017
Posts: 118
|
Post by vayank5150 on Jun 29, 2020 18:33:21 GMT -5
My Lortone 33B (one of two) seems to have a bad motor. I have cleaned and greased all of the pertinent points, yet even with the belt removed, the motor moves slowly and almost seems to stick. This tumbler is less than 2 years old and I am a little surprised to be having this issue. The motor is super hot when I attempt to work on it. Is this something that Lortone tumbler owners just need to deal with? Thank you in advance.
|
|
|
Post by knave on Jun 29, 2020 19:17:12 GMT -5
Google sm999 and see if that would work. I don’t have a Lortone so I don’t know.
|
|
|
Post by manofglass on Jun 29, 2020 22:52:52 GMT -5
My Lortone 33B (one of two) seems to have a bad motor. I have cleaned and greased all of the pertinent points, yet even with the belt removed, the motor moves slowly and almost seems to stick. This tumbler is less than 2 years old and I am a little surprised to be having this issue. The motor is super hot when I attempt to work on it. Is this something that Lortone tumbler owners just need to deal with? Thank you in advance. Well if your warranty is still good replace the motor If not go buy one www.kingsleynorth.com may have one
|
|
Wooferhound
Cave Dweller
Lortone QT66 and 3A
Member since December 2016
Posts: 1,423
|
Post by Wooferhound on Jun 30, 2020 9:01:09 GMT -5
|
|