rockgoddess
off to a rocking start
Member since September 2022
Posts: 3
|
Post by rockgoddess on Sept 12, 2022 22:55:32 GMT -5
Hi! I’ve been using my Lortone QT66 for a couple of years without problems, but notice that the plastic washer in the back has been cutting a ring into the bottom of whichever barrel is placed in the back. I thought this a very strange piece of the design, but having not used these tumblers before, I thought maybe it’s just how that works. Recently, though, this groove has gotten deep enough to allow the barrel to start rubbing against the metal frame, so in addition to what I assume is weakening the bottom of the barrel, now it can get very loud and squeaky as the barrel rubs against the metal. I’ve tried to call Lortone and can’t get any answer, nor will their voicemail let me leave a message (despite telling me I can do so). Anyone know what I’m talking about, perchance? I have a video, but not sure how to upload it here. Thanks!
|
|
rockgoddess
off to a rocking start
Member since September 2022
Posts: 3
|
Post by rockgoddess on Sept 12, 2022 23:07:38 GMT -5
Darn it! Nevermind! I’ve just realized I put the second barrel in backward! Good grief!
|
|
Tommy
Administrator
Member since January 2013
Posts: 12,652
|
Post by Tommy on Sept 13, 2022 10:06:51 GMT -5
Darn it! Nevermind! I’ve just realized I put the second barrel in backward! Good grief! No worries and glad you figured it out! Welcome to the forum.
|
|
|
Post by liveoak on Sept 14, 2022 6:36:09 GMT -5
We've all done silly stuff like that - glad you figured it out
Patty
|
|
Andrewa
starting to spend too much on rocks
Member since September 2022
Posts: 120
|
Post by Andrewa on Sept 25, 2022 12:37:30 GMT -5
Welcome From Scotland.
|
|
|
Post by As I in does tries! on Sept 27, 2022 5:05:32 GMT -5
Greetings and Welcome to RTH Forums from Bonnybridge, Scotland!
|
|