|
Post by stardiamond on Apr 1, 2023 14:35:53 GMT -5
It warmed up enough to use the trim saw. Still too cold to grind. I had a thick slab of BMJ that was mostly unusable except for two areas. I trimmed them and marked the edges to split. I did the split ok but the bottom of the splits wasn't usable. I had a super 7 nodule that I split and drew to preforms. I trimmed some Morrisonite and Jellybean preforms.
|
|
|
Post by stardiamond on Apr 1, 2023 17:23:18 GMT -5
My 10 inch saw needs to be fixed and new 14 needs to be setup. I was ready for a new trim saw blade so I sacrificed the one I was using and cut some slabs and preforms. The picture I bought the piece from looked like the right side and the opposite side showed more color so I took a slab off the bottom and cut two preforms and a possibly usable scrap. The remaining piece has a couple slabs but I will wait until one of my slabs is working.
|
|
|
Post by stardiamond on Apr 2, 2023 18:20:11 GMT -5
|
|
|
Post by stardiamond on Apr 3, 2023 13:38:08 GMT -5
|
|
|
Post by pebblesky on Apr 3, 2023 14:04:15 GMT -5
Wow they look nice!
|
|
|
Post by stardiamond on Apr 3, 2023 14:52:42 GMT -5
|
|
|
Post by kate_foundlings on Apr 4, 2023 19:23:12 GMT -5
That blue and yellow one is just gorgeous!!
|
|
|
Post by stardiamond on Apr 5, 2023 16:03:36 GMT -5
|
|