Mark K
Cave Dweller
Member since April 2012
Posts: 2,818
Member is Online
|
Post by Mark K on Jun 5, 2023 19:10:05 GMT -5
I figured why not see if I can line the can with something. So I took a small, low quality trash bag and put it inside the can and secured the top. Then I trimmed the bag from the outside of the cylinder and let er rip. A few hours later I opened it up and thought it failed. It didn't. There was a free chunk of bag going back and forth in the oil and I thought the bag had ripped. As it turns out, when I pulled it apart, everything was perfect but I didn't see it until I pulled the bag. It looked like a bunch of turds floating in water. So the experiment worked but I don't like the bags I used so I will have to find some I like better.
|
|
aGates
has rocks in the head
Building a silver studio
Member since January 2021
Posts: 518
|
Post by aGates on Jun 5, 2023 23:01:43 GMT -5
Cool thanks for sharing I really love the slab board in the site. I hope to contribute sooner than later. I've been busy.
|
|