valorguy
starting to shine!
Member since August 2022
Posts: 28
|
Post by valorguy on Jun 12, 2023 20:47:14 GMT -5
I am splurging and getting a Highland Park 18" with everclean system. Really excited. I'll let you guys know how it works out..... Hoping for the best. I called/emailed them over and over and over about the width of the saw - to make sure I can wheel this into my basement door lol... They tell me it will fit at 30" wide and my door is 35". If I get a shipment with a bigger width I'm screwed - no where to put it lol So - please PRAY FOR ME  **Sarcasm off now** |
|
lorney
having dreams about rocks
Member since December 2020
Posts: 59
|
Post by lorney on Jun 12, 2023 21:30:08 GMT -5
I am splurging and getting a Highland Park 18" with everclean system. Really excited. I'll let you guys know how it works out..... Hoping for the best. I called/emailed them over and over and over about the width of the saw - to make sure I can wheel this into my basement door lol... They tell me it will fit at 30" wide and my door is 35". If I get a shipment with a bigger width I'm screwed - no where to put it lol So - please PRAY FOR ME **Sarcasm off now** Are they are mounting the Everclean system to the side of the saw? If so it says on their website that it will add 10” to the width of the saw. You should check and confirm. I think there is another way you can do it by putting it on an additional tank below the saw but that costs extra and I am not sure exactly how that works. |
|
valorguy
starting to shine!
Member since August 2022
Posts: 28
|
Post by valorguy on Jun 12, 2023 22:53:58 GMT -5
Yes it ships separately and you mount it yourself. So I can get it in the door and then install that - at least that is a plus !
|
|
khara
fully equipped rock polisher
Member since September 2022
Posts: 1,980
|
Post by khara on Jun 13, 2023 1:11:38 GMT -5
Ok well I’m looking forward to a slide show coming pretty soon.🤓🤓
|
|
valorguy
starting to shine!
Member since August 2022
Posts: 28
|
Post by valorguy on Jun 13, 2023 8:28:46 GMT -5
Ok well I’m looking forward to a slide show coming pretty soon.🤓🤓 Pictures will follow - yes ! They said possibly 2 weeks for me to get it... Large freight companies don't really guarantee a date... Hopefully sooner than later. |
|
Deleted
Deleted Member
Member since January 1970
Posts: 0
|
Post by Deleted on Jun 13, 2023 10:44:00 GMT -5
I'm interested to hear how it goes.
Please post lots of photos.
|
|
Mark K
Cave Dweller 
Member since April 2012
Posts: 2,818 
|
Post by Mark K on Jun 13, 2023 20:21:31 GMT -5
Before you go to mount the everclean, get a strong helper. One guy holds the machine in place while the other gets the bolts in place. You will be glad you did.
|
|
|
|
Post by jasoninsd on Jun 13, 2023 21:28:41 GMT -5
Ok well I’m looking forward to a slide show coming pretty soon.🤓🤓 Pictures will follow - yes ! They said possibly 2 weeks for me to get it... Large freight companies don't really guarantee a date... Hopefully sooner than later. I'm SO excited for you!! Oh...and yes...those of us who have to live vicariously at the moment would LOVE to see pics!! |
|
|
|
Post by Starguy on Jun 13, 2023 21:59:59 GMT -5
Niiiiice! Can’t wait to see pictures of the saw and ensuing slabs.
|
|
|
|
Post by aDave on Jun 13, 2023 22:04:49 GMT -5
Before you go to mount the everclean, get a strong helper. One guy holds the machine in place while the other gets the bolts in place. You will be glad you did. Nice. I was just getting ready to tag you since you just installed one. |
|
valorguy
starting to shine!
Member since August 2022
Posts: 28
|
Post by valorguy on Jun 14, 2023 16:35:31 GMT -5
Before you go to mount the everclean, get a strong helper. One guy holds the machine in place while the other gets the bolts in place. You will be glad you did. Good to know. I'll have to find someone to do that. I was assuming it was pretty heavy, but this will definitely help me to know what to have ready when I start. |
|
Mark K
Cave Dweller
Member since April 2012
Posts: 2,818
|
Post by Mark K on Jun 14, 2023 18:10:38 GMT -5
And make sure you have all of the correct tools before you begin.
|
|
rockbrain
Cave Dweller
Member since January 2022
Posts: 3,172
|
Post by rockbrain on Jun 15, 2023 8:54:19 GMT -5
I'm also excited for you. I know how excited I was to get my used old saw. Sounds like you'll have to have a strong guy or 2 lined up anyway to get it all down the stairs unless you happen to have on really good hand truck! Good like, and as others have said, post some pics.
|
|
stefan
Cave Dweller
Member since January 2005
Posts: 14,113
|
Post by stefan on Jun 25, 2023 13:36:18 GMT -5
So excited. I have a 14" and love it. Wish I could swing the everclean, but it is as expensive as my saw!.
|
|
geoff59
spending too much on rocks
Member since October 2022
Posts: 288
|
Post by geoff59 on Jun 26, 2023 5:07:17 GMT -5
Wow, that’s great, I would be psyched too!
My only advice is, when you install it, take your time, double check everything, and make sure the job is done right.
|
|
|
|
Post by Starguy on Jun 27, 2023 11:43:05 GMT -5
|
|
rockbrain
Cave Dweller
Member since January 2022
Posts: 3,172
|
Post by rockbrain on Jun 28, 2023 9:13:10 GMT -5
You just beat me to it Starguy. I was just going to post that it should be soon! I'm hoping HP's timelines are accurate as I'm waiting too! |
|
valorguy
starting to shine!
Member since August 2022
Posts: 28
|
Post by valorguy on Jun 28, 2023 23:04:16 GMT -5
Everything is installed... Now I have to figure out why I have a few tiny leaks on the everclean system. Would you advise that I tighten everything up very tight, where the motor and the connectors are at? Or, am I always going to have a few tiny leaks and I need to just pure something under the machine? If this, what would you a advise. It's in my basement, so not really trying to muck everything up. More pics to come!     |
|
Mark K
Cave Dweller
Member since April 2012
Posts: 2,818
|
Post by Mark K on Jun 29, 2023 5:45:02 GMT -5
There should not be any leaks between the everclean and a new saw. Contact them immediately. Talk to John, not one of the girls.
|
|
valorguy
starting to shine!
Member since August 2022
Posts: 28
|
Post by valorguy on Jun 29, 2023 7:52:30 GMT -5
I have a leak at the nipple for the cleanout also, I used plumbers take before tightening it. It's as tight as it will go. Any ideas on how to stop that also? I though about maybe something could be put inside the machine over that hole... Just not sure what. I will call John today about the everclean leaks.   |
|
