azagatehunter
off to a rocking start
Member since February 2024
Posts: 2
|
Post by azagatehunter on Feb 21, 2024 15:22:59 GMT -5
New member here. So picked up a thumlers 18 vibratory but the previous owner literally welded the counterweights together for least vibration.
Any place to get replacements or ideas to do it myself?
|
|
Mark K
Cave Dweller 
Member since April 2012
Posts: 2,821 
|
Post by Mark K on Feb 21, 2024 15:49:00 GMT -5
If you need parts from them, you are screwed. Their customer service is non-existent. Probably one of the worst I have ever seen.
|
|
NDK
Cave Dweller
Member since January 2009
Posts: 9,440
|
Post by NDK on Feb 21, 2024 19:05:44 GMT -5
How heavily are they welded? Could you remove the weights and grind off the welds?
|
|
azagatehunter
off to a rocking start
Member since February 2024
Posts: 2
|
Post by azagatehunter on Feb 21, 2024 23:28:38 GMT -5
How heavily are they welded? Could you remove the weights and grind off the welds? Likely what I will do |
|
JR8675309
freely admits to licking rocks
Member since August 2019
Posts: 807
|
Post by JR8675309 on May 15, 2024 6:47:22 GMT -5
I had a conversation with Al via email, maybe that will help.
t-tumbler@thumlerstumbler.com
|
|
JR8675309
freely admits to licking rocks
Member since August 2019
Posts: 807
|
Post by JR8675309 on May 17, 2024 11:56:12 GMT -5
I had a conversation with Al via email, maybe that will help. t-tumbler@thumlerstumbler.com I contacted them Wednesday for a motor, no reply. Good luck. |
|
... to the New Guys from The ChatBox V.2 Crew