|
Post by cpdad on Jul 16, 2007 17:42:03 GMT -5
all stainless steel....usually made for spent 25 caliber shells around the outside....and a shotgun shell in the middle....this ones getting rocks....at least in the middle ;D. oh connrock had about a half hour in it ;D...kinda...kev. click
|
|
|
Post by beefjello on Jul 16, 2007 18:52:12 GMT -5
Cool! Can't wait to see it finished.
|
|
|
Post by connrock on Jul 16, 2007 19:54:34 GMT -5
You sure that's SS? It looks like brass.
Did you make the blank,,,,,,,,,,,,,,,If not,,,,,,,,,,That's cheatin!!!! LOL
I'll be waitin and lookin!!
connrock
|
|
|
Post by cpdad on Jul 16, 2007 20:36:29 GMT -5
hahaha....my friend brian can make loads at the time....i just have to saw and polish...or he saws and polishes....he usually adds coins or gun shells to them....yes its stainless...just a bad pic....good lord yaw know i cant take a pic.....the half hour was sawing and a little polishing ;D.
we are going to add them to a small website we are trying to build...he makes bracelets also....they are killer twisted wire and such.....kev ;D
|
|
|
Post by parfive on Jul 16, 2007 23:52:56 GMT -5
Thought you had to be a fitter on a nuke to make them. ;D
Rich
|
|
karenfh
fully equipped rock polisher
Member since November 2006
Posts: 1,495
|
Post by karenfh on Jul 17, 2007 2:50:24 GMT -5
Isn't that gonna hurt when you sit down or bend over? But, it will look really cool with a rock in it, so I guess it's worth it, right?
|
|
|
Post by creativeminded on Jul 17, 2007 8:53:45 GMT -5
That is going to be beautiful when you are through with it. Tami
|
|
|
Post by krazydiamond on Jul 17, 2007 14:35:32 GMT -5
that looks interesting! how big is it overall?
KD
|
|
|
Post by connrock on Jul 17, 2007 17:28:45 GMT -5
Keven, In the photo's I posted of the rough blank you can see that the cut was not even close to parallel. The thickness varied from side to side by over 0.030" and that's a lot of filing with stainless.
I made a figure to hold the SS so I could put iton the magnetic table of a small surface grinder where I got it parallel to within 0.0005".
I'm not a cheater like you,,,,,I did everything but mine the ore for the metal!!!!! LOL ;D ;D ;D
connrock
|
|
|
Post by rockyraccoon on Jul 17, 2007 18:43:12 GMT -5
alright i can't wait to see it finished. hurry up!
kim
|
|