Tonya
spending too much on rocks
Member since May 2005
Posts: 304
|
Post by Tonya on May 15, 2005 11:58:06 GMT -5
Hi,
I am new here and new to rock tumbling. I just got a Lortone 3A tumbler in the mail yesterday.
I have some amethyst, emeralds and rubies that I want to tumble.
Can I put all three together or should they be done separately?
Does anybody have better recipes that what is in the Lortone instruction book?
I have the lortone 4 step grit kit which has
60/90 coarse 120/220 med/fine aluminum oxide prepolish ultra fine aluminum oxide polish plastic pellets
I am anxious to get started but could use some helpful hints on what to do.
Thanks so much
|
|
|
Post by Cher on May 15, 2005 12:14:10 GMT -5
Hi and welcome to the forum. Check out the General forum (1st on list) there's lots of posts in there about doing emeralds and the other. You might also try the search feature to find some. Good luck, Lortones a good brand of tumbler that will give you years of service.
Cher
|
|
|
Post by sandsman1 on May 15, 2005 13:00:08 GMT -5
|
|