|
Post by docone31 on Nov 28, 2007 21:56:58 GMT -5
Hey gang. I was watching on the History channel on the restoration of the Taj Mahol. They showed how the huge stones were cut back then. They used wire! It showed them pulling wire back and forth with grit. The commentator was amazed at how fast it cut. It showed two people, each with a piece of wood with wire wrapped on it, pulling back and forth through the stone. As the wire wore, they took wire from each end as needed. It was fascinating. It took two men 1/2 day to cut through one side. Waaaay cool.
|
|
Deleted
Deleted Member
Member since January 1970
Posts: 0
|
Post by Deleted on Nov 28, 2007 23:25:28 GMT -5
Wow, I didnt know that doc......I wish I would have seen the show, sounds interesting and is just the kind of thing I like to watch. We think we have such technology but so much of what we do now was done back then.
Shannon
|
|
|
Post by catmandewe on Nov 28, 2007 23:26:23 GMT -5
I wonder how much grit you would need?
|
|
|
Post by docone31 on Nov 28, 2007 23:37:25 GMT -5
They did not use an whole lot of water, nor grit. It was fascinating. It looked like light pressure also. Just an whole lot of back and forth. Old time aerobics.
|
|
erbojones
has rocks in the head
Member since October 2006
Posts: 659
|
Post by erbojones on Nov 29, 2007 5:28:41 GMT -5
I read on a website that a certain guitar string (has got coils of wire around it - can't remember what note it was) - is quite good at cutting through rock if you use some grit with it. I might give it a go one day!
|
|
|
Post by Tonyterner on Nov 30, 2007 15:18:11 GMT -5
I use wire on wood on my lathe, mostly just to get the burn marks. If I wanted to I could cut through the hardest wood in no time flat, even with a smooth wire. That is at pretty high speed though.
|
|