|
|
Post by Tweetiepy on Jun 14, 2007 9:24:27 GMT -5
I was gifted some diamond paste & instructions on how to apply the two different types to a resin belt - problem is, I have no idea where to get these resin belts - I found something but it was about $50 are they really that expensive? Can I use a worn 600 grit belt? Or will that be bad? Where can I get a leather belt and would that work? Remember I'm in no-purchase-land Canada
Thanks for the help
|
|
|
|
Post by akansan on Jun 14, 2007 9:33:36 GMT -5
Not that expensive at all. Mine came from arrowheadlapidarysupply - about $3.00 a piece.
|
|
Deleted
Deleted Member
Member since January 1970
Posts: 0
|
Post by Deleted on Jun 14, 2007 13:04:01 GMT -5
I get mine from Graves...... www.gravescompany.com They are cheap and last a long time. I love my expanding drum and resin belts and have no plans of switching to diamond sanding and polishing wheels. Shannon |
|
Deleted
Deleted Member
Member since January 1970
Posts: 0
|
Post by Deleted on Jun 14, 2007 13:06:53 GMT -5
Tweet,
Just make sure you are real careful about contaminating the resin belts. Keep each one in its own box or container and wash your stones real well in between grits. I keep all of mine in food storage containers, all in a neat stack on a shelf with the grit written in sharpie on the side. If a piece of grit or other junk gets ground into the belt it will ruin the finish on your stones.
Shannon
|
|
