karock
has rocks in the head
Member since November 2007
Posts: 667
|
Post by karock on Jul 24, 2009 11:22:46 GMT -5
I thought i would ask the pro's I have a MK 101 Tile saw. I mostly cut by holding the stones. Yesterday the blade started to do some weird wobbling. Is this the result of a bearing going bad or the blade (10" HUSKY from HD) getting worn out? Karock
|
|
|
Post by texaswoodie on Jul 24, 2009 11:54:48 GMT -5
It could be either one. Take the blade off and lay it down. Put a ruler or other straight edge on it to see if it's perfectly flat.
Work the arbor back and forth to see if you have any slack.
Curt
|
|
|
Post by johnjsgems on Jul 24, 2009 14:25:19 GMT -5
Those are really tough saws but all things wear out. Most likely a dished blade from hand feeding. What Curt said sounds right.
|
|