ZackAttack
starting to shine!
Member since January 2007
Posts: 45
|
Post by ZackAttack on Sept 12, 2009 21:15:20 GMT -5
Anybody know where Adrians original groove wrap tutorial is, I can't seem to find it anymore. :help:
|
|
|
Post by rockmanken on Sept 12, 2009 21:51:46 GMT -5
It is up 4 lines from this post.
|
|
adrian65
Cave Dweller
Arch to golden memories and to great friends.
Member since February 2007
Posts: 10,786
|
Post by adrian65 on Sept 13, 2009 6:07:42 GMT -5
I think Zack refers to my other one, posted a while ago, which wasn't pinned. I used a jade cab for it. I'll search for it (although the proboards search engine really sucks). Zack, anyway this more recent tutorial which Ken is pointing to (Thank you Ken) is pretty complete, excepting the way I cut the groove. And I doubt you will cut it the same way I do, as I use my own home made machine. Adrian PS Here it is: forum.rocktumblinghobby.com/index.cgi?board=wwp&action=display&thread=23856&page=1Anyway, things have changed a bit since then; if you compare the link above with the pinned tutorial you will notice some differences, mostly regarding the way I grind and shine the wire.
|
|
ZackAttack
starting to shine!
Member since January 2007
Posts: 45
|
Post by ZackAttack on Sept 13, 2009 7:18:14 GMT -5
Thanks Adrian, I remembered that the first one you did showed the way you marked the girdle for the groove. That's what I needed.
|
|