buck570
starting to shine!
Member since February 2009
Posts: 46
|
Post by buck570 on Sept 20, 2009 21:22:04 GMT -5
Gathering parts for a saw, one is an electric auto feed. It looks to be missing the feed nut . Can any one post pics on what it looks like,or sources to get one . thanks
|
|
|
Post by sandsman1 on Sept 21, 2009 1:02:32 GMT -5
what brand and model is it
|
|
buck570
starting to shine!
Member since February 2009
Posts: 46
|
Post by buck570 on Sept 21, 2009 21:15:16 GMT -5
It's just the feed and vice, looks to mount on a table type saw like ray tecs 10 inch.
|
|
|
Post by catmandewe on Sept 21, 2009 22:00:51 GMT -5
You can make one by sawing a nut in half and making a spring vise to hold it together, with a cantilever lever to hold it apart so you can move it up and down when you are needing to move it. Or you can order one of Covington's vise clamps, at the link below, 2 different sizes. www.covington-engineering.com/slab_saw_accessories.htmTony
|
|
buck570
starting to shine!
Member since February 2009
Posts: 46
|
Post by buck570 on Sept 22, 2009 20:50:54 GMT -5
Thanks a lot just what i was looking for.
|
|