Post by Deleted on Sept 28, 2009 19:20:33 GMT -5
CABBING MACHINE FOR SALE
Graves Cabmate, Cabbing machine/trim saw/flat lap combo
THE MACHINE HAS BEEN USED ON LESS THAN 100 CABS. Many of the accessories are brand new. Changing wheels/drums consists of quick removal of one nut. Wheel changes take just a few seconds.
I researched long and hard before choosing this machine. It has been in constant production for over 40 years. I spoke with some individuals that own this machine, prior to purchasing it. All said it was a sturdy built dependable machine. One liked his so much, he purchased a second one for his RV.
PLEASE NOTE: I LOVE this machine and have never had a single issue with it. I am only parting with it out of necessity......the money will go towards a faceting machine I am purchasing from Tony. Everything works perfectly for sawing, grinding, polishing, and flat lapping. The only thing not included that originally came with the machine is a water drip tank. I broke it when I walked by and hit it with a rock (imagine that). You could use anything for a drip system. Ive been using a juice container with a valve and tubing. Check out the pics below to see what Ive made with this machine.
Original Purchase price: $499
This price included the machine, 2 speed motor, saw table, splashguard, water drip tank, lamp/light. Entire unit is a nice portable size: 10 1/2" x 19 1/2" and 30 lbs.
Additional accessories that I purchased that WILL be included:
1 80 grit 6"x1 1/2" jadecarver diamond wheel (Purchase price $63.00)
1 220 grit 6" x 1 1/2" jadecarver diamond wheel (Purchase price $63.00)
1 Rayspan Expandable Drum (Purchase price $53.00)
1 Resin Belt (for use with diamond paste)
1 100 grit SiC Belts
2 220 grit SiC Belts
2 400 grit Sic Belts
2 600 grit Sic Belts
2 1200 grit Sic Belts
(All Belts are brand new, Purchase Price $27.50 Total)
1 Rubber Flex-o-disc (screw on endplate for attaching sanding/polishing pads, brand new, Purchase price $17.20)
1 6" canvas pad (Brand new Purchase Price $6.20)
1 6" Leather pad (Brand new, Purchase Price $6.04)
1 6" Sponge pad (Brand new, Purchase Price $3.75)
(1) 170 Grit 6" Diamond Flat Lap (Purchase price $39.95)
(1) 325 Grit 6" Diamond Flat Lap (Purchase Price $39.95)
(1) 600 Grit 6" Diamond Flat Lap (Purchase Price $39.95)
(1) 1200 Grit 6" Diamond Flat Lap (Purchase Price $39.95)
All worn but still usable with diamond visible
(1) Acrylic Master Lap (for attaching polishing pads) $13.95
1 rock vise, made to fit the saw table, Brand new (Purchase price $23.95)
1 diamond saw blade (Purchase price $28.95, worn but still some diamond visible)
1 bottle Cerium Oxide
You could quite literally take this machine out of the box, plug it in, and have everything you need to cut, grind and polish cabs and flats.
I have over $950.00 into this setup.
ASKING PRICE: $600 + Shipping, Money Order or Paypal only. Reasonable offers can also be discussed! ;D
If you want to figure out shipping, my zip code is 97051. The machine will be shipped in a box that is 23" long x 13" wide x 18" high and weighs 30 lbs. All accessories will be shipped in one flat rate box at a cost of around $10. Make sure you check both UPS and USPS. I already quoted one person shipping and the post office was a bit cheaper at a total of around $30 for everything.
Some pics:
Its always been well maintained and has only been used in my dining room.
Youngest daughter using the machine:
Some great cuts Ive done with the trim saw, freehand 2mm thick cuts
And a couple of cabs:
pm me if you have any questions.
Shannon
Graves Cabmate, Cabbing machine/trim saw/flat lap combo
THE MACHINE HAS BEEN USED ON LESS THAN 100 CABS. Many of the accessories are brand new. Changing wheels/drums consists of quick removal of one nut. Wheel changes take just a few seconds.
I researched long and hard before choosing this machine. It has been in constant production for over 40 years. I spoke with some individuals that own this machine, prior to purchasing it. All said it was a sturdy built dependable machine. One liked his so much, he purchased a second one for his RV.
PLEASE NOTE: I LOVE this machine and have never had a single issue with it. I am only parting with it out of necessity......the money will go towards a faceting machine I am purchasing from Tony. Everything works perfectly for sawing, grinding, polishing, and flat lapping. The only thing not included that originally came with the machine is a water drip tank. I broke it when I walked by and hit it with a rock (imagine that). You could use anything for a drip system. Ive been using a juice container with a valve and tubing. Check out the pics below to see what Ive made with this machine.
Original Purchase price: $499
This price included the machine, 2 speed motor, saw table, splashguard, water drip tank, lamp/light. Entire unit is a nice portable size: 10 1/2" x 19 1/2" and 30 lbs.
Additional accessories that I purchased that WILL be included:
1 80 grit 6"x1 1/2" jadecarver diamond wheel (Purchase price $63.00)
1 220 grit 6" x 1 1/2" jadecarver diamond wheel (Purchase price $63.00)
1 Rayspan Expandable Drum (Purchase price $53.00)
1 Resin Belt (for use with diamond paste)
1 100 grit SiC Belts
2 220 grit SiC Belts
2 400 grit Sic Belts
2 600 grit Sic Belts
2 1200 grit Sic Belts
(All Belts are brand new, Purchase Price $27.50 Total)
1 Rubber Flex-o-disc (screw on endplate for attaching sanding/polishing pads, brand new, Purchase price $17.20)
1 6" canvas pad (Brand new Purchase Price $6.20)
1 6" Leather pad (Brand new, Purchase Price $6.04)
1 6" Sponge pad (Brand new, Purchase Price $3.75)
(1) 170 Grit 6" Diamond Flat Lap (Purchase price $39.95)
(1) 325 Grit 6" Diamond Flat Lap (Purchase Price $39.95)
(1) 600 Grit 6" Diamond Flat Lap (Purchase Price $39.95)
(1) 1200 Grit 6" Diamond Flat Lap (Purchase Price $39.95)
All worn but still usable with diamond visible
(1) Acrylic Master Lap (for attaching polishing pads) $13.95
1 rock vise, made to fit the saw table, Brand new (Purchase price $23.95)
1 diamond saw blade (Purchase price $28.95, worn but still some diamond visible)
1 bottle Cerium Oxide
You could quite literally take this machine out of the box, plug it in, and have everything you need to cut, grind and polish cabs and flats.
I have over $950.00 into this setup.
ASKING PRICE: $600 + Shipping, Money Order or Paypal only. Reasonable offers can also be discussed! ;D
If you want to figure out shipping, my zip code is 97051. The machine will be shipped in a box that is 23" long x 13" wide x 18" high and weighs 30 lbs. All accessories will be shipped in one flat rate box at a cost of around $10. Make sure you check both UPS and USPS. I already quoted one person shipping and the post office was a bit cheaper at a total of around $30 for everything.
Some pics:
Its always been well maintained and has only been used in my dining room.
Youngest daughter using the machine:
Some great cuts Ive done with the trim saw, freehand 2mm thick cuts
And a couple of cabs:
pm me if you have any questions.
Shannon