waxman
starting to shine!
Opal & diamond ring, handcrafted by Waxman.
Member since June 2009
Posts: 38
|
Post by waxman on Nov 17, 2009 6:13:19 GMT -5
Hi from Oz, I have a 9ct gold ring which is set with a tiger eye cab, the ring has to be resized down and the cab has to be re sanded and re polished it's had a very hard life! On removing the stone I found 2 cracks, 1 each side at the base, the stone is approx 12mm x 10mm, I don't want to replace the original stone, as it has sentimental value. My question is, has anyone used Opticon or Hot Stuff to repair a stone like this and what would be the best method to do so? Any advice would be greatly appreciated. :help: Thanks, Ivan
|
|
|
Post by Toad on Nov 17, 2009 7:47:48 GMT -5
I think I saw in another thread that frane has used it - maybe send her a pm?
|
|
|
Post by Rockoonz on Nov 17, 2009 20:01:37 GMT -5
I have not tried this yet (disclaimer) but these instructions came from a long time rock shop owner and jeweler. Try this on a different stone first. This is with Opticon.
Do not mix the opticon first!! Step 1- Soak the stone in the opticon resin (large container) for 20-30 minutes. The unused resin can be saved for future use, but don't pour back into the original container. Step 2- Remove the stone and wipe off all excess with something that's lint free. Step 3- Immediately brush the hardener (small container) onto the stone. Don't put the brush into the can, pour a very small amount out since this won't be re-usable. I don't remember what she said to put it on, I suggest heavy polyethylene like a freezer bag, most adhesives don't stick to poly. It is probably best to brush the back of the stone first so it doesn't have to be handled while the front hardens. Step 4- Wait a day for it to finish curing and polish with whatever is appropriate for the stone. Here's where experimenting with a less valuable stone is important.
Please let us know how this works.
Lee
|
|