|
Post by Roller on May 4, 2011 21:15:33 GMT -5
Iam wondering how these work . Does Anyone have a picture of one of these while in use ? Which size would be a good choice for a 10" saw ?
|
|
|
Post by johnjsgems on May 4, 2011 22:57:47 GMT -5
Small. The large ones are 5". I saw some 9" Texas Rock brand at the rock shop in San Antone but he turned down my $10 offer for one. Didn't even make a counter offer and he had at least ten. He only had two small ones and the guy from Boerne snagged those.
|
|
juzwuz
has rocks in the head
Member since April 2010
Posts: 526
|
Post by juzwuz on May 4, 2011 23:29:45 GMT -5
|
|
juzwuz
has rocks in the head
Member since April 2010
Posts: 526
|
Post by juzwuz on May 5, 2011 1:52:14 GMT -5
|
|
|
Post by Roller on May 5, 2011 7:04:19 GMT -5
Than You guys ... Juzwuz the pictures really helped me out ! Iam actually thinking that the bigger one would be best for my machine since my vice is the opposite direction of the one you have pictured above ... my maximum width would be slightly wider than the width of the s-gbber so the lortone small ones 1.5 and open up to 3" or the medium is 2.75 and open up to 5+ ..... ... I think the medium would give me a wider cut if needed but my length maxes out at the usual height of the blade .3 3/4
|
|