tespertu
starting to shine!
Member since June 2011
Posts: 25
|
Post by tespertu on Aug 12, 2012 18:38:03 GMT -5
i have a 10' slab saw and i need to get a new blade for it. I need a general blade that will cut anything. Does anyone have any suggestions
|
|
shermlock
has rocks in the head
Member since August 2011
Posts: 612
|
Post by shermlock on Aug 12, 2012 20:09:01 GMT -5
I use a BD 303C. They are more expensive but they last and last. I cut a ton of agate and jasper and it does just fine. Here is where I get mine: johnwease.site.aplus.net/cgi-bin/mivavm?/mm5/merchant.mvc+ John is on the boards often and you can describe exactly what you want and he will make a recommendation. He doesn't publicly advertise on the forum (I like the laid back sales approach!) and I am sure he'll help even if you choose to buy from somebody else. Scott
|
|
|
Post by jakesrocks on Aug 12, 2012 20:50:34 GMT -5
|
|
tespertu
starting to shine!
Member since June 2011
Posts: 25
|
Post by tespertu on Aug 13, 2012 8:12:34 GMT -5
I was going to buy from john already. He is who I usually buy from. I was looking at the 303c just didn't know if it was my best choice.
|
|
|
Post by jakesrocks on Aug 13, 2012 10:12:02 GMT -5
Can't go wrong with the 303 blades. I'll never buy another type, unless they come up with something that proves to be better.
|
|
|
Post by johnjsgems on Aug 13, 2012 15:37:10 GMT -5
The 301 is an even better blade but at nearly twice the cost.
|
|