|
Post by deb193redux on Jan 13, 2013 19:18:47 GMT -5
the seem a little fast. I thought regular/low was about 5min/in = 20"/hr
|
|
|
Post by johnjsgems on Jan 13, 2013 20:04:30 GMT -5
Run it at the lowest speed if you want smooth cuts and long blade life.
|
|
dirtdog
off to a rocking start
Member since January 2013
Posts: 2
|
Post by dirtdog on Jan 13, 2013 22:13:23 GMT -5
Thanks, if anyone owns one I would like to ask more questions specific to frantom. Just picked up an 18" frantom, I clocked the feed rate, on low it is 18" per hour, Medium = 24" per hour, and Fast at 30" per hour. Does anyone know if these speeds are OK? Thanks Dirtdog I clocked my Lortone ls-12 @ 16.5 inches / hour as a comparison
|
|
|
Post by deb193redux on Jan 13, 2013 22:27:11 GMT -5
you can change the pulley to slow it down a bit.
|
|
|
Post by johnjsgems on Jan 13, 2013 23:07:04 GMT -5
The neighbor across from me is running a Frantom 18". I'll talk to him tomorrow.
|
|