jspencer
freely admits to licking rocks
Member since March 2011
Posts: 929
|
Post by jspencer on Jan 26, 2013 11:23:13 GMT -5
I am wondering where you good folks get your carving burrs to fit a Dremel. After seeing the fire agates Kurt posted and all the beautiful ones that Christopher turns out it makes me want to go dig into the fire agates that have sat in a drawer forever. I see fire in a few but have to get down to it better. I tried using the small diamond tips from hardware stores by Dremel but they are too fine of grit.
|
|
|
|
Post by FrogAndBearCreations on Jan 26, 2013 11:54:09 GMT -5
|
|
jspencer
freely admits to licking rocks
Member since March 2011
Posts: 929
|
Post by jspencer on Jan 26, 2013 15:17:15 GMT -5
Thank you! These people seem to have everything I could need and more! I have had some fire agates forever and getting a few more in a trade so I need to get busy with them. Hope I find something good inside. Many look promising. Thanks again! ;D
|
|
Don
Cave Dweller 
He wants you too, Malachi.
Member since December 2009
Posts: 2,616
|
Post by Don on Jan 26, 2013 15:34:33 GMT -5
This question has been answered quite a bit in the past as well, might want to search the threads here.
|
|
|
|
Post by kk on Jan 27, 2013 9:38:36 GMT -5
Go get them, and have fun.  |
|
