oregon chain

chassroc
Cave Dweller

Rocks are abundant when you have rocktumblinghobby pals

Member since January 2005
Posts: 3,586

oregon chain Nov 3, 2013 10:17:21 GMT -5

Quote

Post by chassroc on Nov 3, 2013 10:17:21 GMT -5

I have a chain which is brand new, never used.

When I bought it(Oct2008), it was labeled : Oregon 20-PF-56.

I took a chance it would fit my POULAN 16 inch saw, but no luck...This appears to be for a 13 inch(or 12 or 14) inch saw, see picture below

I'm not sure what brand saw it's for:

If anyone recognizes it and wants it, let me know

It's free
Charlie

Not sure of the exact way of measuring a chain but the chain links are 3.8 mm wide (without rivets) 4.5 mmm with rivets
about 5.2 mm high
Each link is about 12mm apart

The cutting elements are about 4mm across and 5 if you count the chain

drycreek
off to a rocking start

Member since November 2013
Posts: 4

oregon chain Nov 3, 2013 11:27:08 GMT -5

Quote

Post by drycreek on Nov 3, 2013 11:27:08 GMT -5

If you look at the drivers (the ones pointing in that fit in the bar) there should be a number (probably 72) that tells the guage of the chain. With that and the length (determined by counting the number of drivers (probably 56 on yours) someone can determine if it will work for them.

Last Edit: Nov 3, 2013 15:27:40 GMT -5 by drycreek

David

marinedad freely admits to licking rocks Member since December 2010 Posts: 813	oregon chain Nov 3, 2013 12:54:33 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by marinedad on Nov 3, 2013 12:54:33 GMT -5 I just bought a 14" poulan saw, could use another blade if I knew it fit.

chassroc
Cave Dweller

Rocks are abundant when you have rocktumblinghobby pals

Member since January 2005
Posts: 3,586

oregon chain Nov 3, 2013 18:27:57 GMT -5

Quote

Post by chassroc on Nov 3, 2013 18:27:57 GMT -5

This chain is really small...Looks too small for a 14 inch poulan but maybe

You can see from the picture that it is about 13 or 13 and a half inches long
...maybe that's what a 14 inch chain looks like
Measure yours and you will have a better idea
I'm guessing it is for an electric or maybe one of those pole saws

No writing on the drivers on this one

Charlie

marinedad freely admits to licking rocks Member since December 2010 Posts: 813	oregon chain Nov 3, 2013 19:03:03 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by marinedad on Nov 3, 2013 19:03:03 GMT -5 I will check it Monday.

NM Stone Supply freely admits to licking rocks Rocks in my head! Member since March 2006 Posts: 916	oregon chain Nov 5, 2013 8:30:06 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by NM Stone Supply on Nov 5, 2013 8:30:06 GMT -5 That would be for a 12" bar more than likely. Maybe one of the small pole saws. Rock on! Jason
	WWW.NMSTONESUPPLY.COM

marinedad freely admits to licking rocks Member since December 2010 Posts: 813	oregon chain Nov 5, 2013 19:28:10 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by marinedad on Nov 5, 2013 19:28:10 GMT -5 too small for my 14"

« Prev
1
Next »

rocknrob: That was one heck of a windstorm that thankfully missed me. I guess Seatac almost hit 60mph gusts. I bet those were some fun landings Nov 20, 2024 21:55:16 GMT -5

Post by chassroc on Nov 3, 2013 10:17:21 GMT -5

Post by drycreek on Nov 3, 2013 11:27:08 GMT -5

Post by marinedad on Nov 3, 2013 12:54:33 GMT -5

Post by chassroc on Nov 3, 2013 18:27:57 GMT -5

Post by marinedad on Nov 3, 2013 19:03:03 GMT -5

Post by NM Stone Supply on Nov 5, 2013 8:30:06 GMT -5

Post by marinedad on Nov 5, 2013 19:28:10 GMT -5

Chat Box v.2