miander
spending too much on rocks
Searching for the shop of my dreams...
Member since November 2013
Posts: 407
|
Post by miander on Jan 27, 2014 8:19:16 GMT -5
Which one is better??? Thanks folks
|
|
rxscram
has rocks in the head
Member since August 2011
Posts: 519
|
Post by rxscram on Jan 27, 2014 13:34:17 GMT -5
That's kind of a vague question... what are you wanting to do with it?
Do you already have a trim saw? If so, the main reason (I think) to get the combination unit is ruled out. If you don't, would an inexpensive tile saw with a good lapidary blade work well enough for you?
My personal opinion is that for half the cost of either of those units, it would be better to get the wheels and build your own. There are some really great home made setups if you search around on this forum a little while.
(My personal preference for a pre-made unit would be a Titan.)
|
|
|
Post by radio on Jan 27, 2014 18:27:29 GMT -5
Cab King for me. Just got the 8V and love it! They sell an optional trim saw attachment for both the 6 and 8 inch models. Although it requires you to remove the wheels on one side, it is a pretty easy task. The trim saw for mine does a dandy job. I would rather fuss with setting up the saw every once in a while rather than have limited wheels and room on a combo machine all the time. I do a heckuva lot of cabbing though, so I set aside a day or two for trimming and make a heckabunch of preforms while I'm at it
|
|
|
Post by Rockoonz on Jan 30, 2014 1:00:03 GMT -5
I know it's not one of the choices but... This... sphereproducts.com/cabmaking-slabpolishing.htmFor the price of a Cab King or Covington you can buy this and a nice new trim saw and have money left for rocks and you get a better machine too. Lee #2
|
|
unclestu
Cave Dweller
WINNER OF THE FIRST RTH KILLER CAB CONTEST UNCLESTU'S AGUA NUEVA AGATE
Member since April 2011
Posts: 2,298
|
Post by unclestu on Jan 30, 2014 4:02:20 GMT -5
|
|
miander
spending too much on rocks
Searching for the shop of my dreams...
Member since November 2013
Posts: 407
|
Post by miander on Jan 30, 2014 9:00:00 GMT -5
Thanks for the replies - looking at what you produce Stu, I'd say that KN is a safe investment!
|
|
|
Post by Rockoonz on Jan 31, 2014 0:26:01 GMT -5
The KN machine is made by Lortone, a very good unit.
Lee #2
|
|