|
|
Post by johnjsgems on Jul 18, 2014 10:33:02 GMT -5
While supplies last - 20" 301 blades only $325 plus shipping. List price $525. I'll be changing price on my website today.
|
|
bsky4463
fully equipped rock polisher
Member since September 2013
Posts: 1,696
|
Post by bsky4463 on Jul 18, 2014 11:37:25 GMT -5
sweet deal...if I only had 2 more inches, story of my life, of blade I would be in for sure. good luck with sale. Cheers
|
|
|
|
Post by johnjsgems on Jul 18, 2014 13:49:22 GMT -5
A lot of 18" saws will take a 20" blade. Not mine though. It is actually Barranca that has an overstock. They just offered me a better price to move some for them. They have about 50 in stock so better hurry.
|
|
Tommy
Administrator 
Member since January 2013
Posts: 12,993
|
Post by Tommy on Jul 18, 2014 14:43:02 GMT -5
I'm in the market for an 18" 301 if you have any of those maybe you can shoot me a price? I don't think my HP will run a 20" will it?
|
|
Deleted
Deleted Member
Member since January 1970
Posts: 0
|
Post by Deleted on Jul 18, 2014 15:15:02 GMT -5
I'm in the market for an 18" 301 if you have any of those maybe you can shoot me a price? I don't think my HP will run a 20" will it? How much space below/behind/above your blade?? More than 1". Make your saw a 20"!! MUST be more than 1" in all three measurements. |
|
Tommy
Administrator
Member since January 2013
Posts: 12,993
|
Post by Tommy on Jul 18, 2014 16:10:37 GMT -5
Hmmm... seems to be an inch or more from memory. I won't be home till after dark tonight but it sounds like I'm going to be getting dirty with a flashlight heehee
|
|
Deleted
Deleted Member
Member since January 1970
Posts: 0
|
Post by Deleted on Jul 18, 2014 16:45:49 GMT -5
|
|
|
|
Post by phil on Jul 18, 2014 21:38:03 GMT -5
John, they overstocked on any 16 inchers?
|
|
|
|
Post by johnjsgems on Jul 20, 2014 21:30:57 GMT -5
Earlier they decided they were overstocked on all 301 blades and offered them to dealers at a really low price. I debated for two days and everything except the 20's were sold out. It was several weeks before they restocked and no more sale. They have a Summer Sale on most of their blades through August 31st and I can do a few bucks off most of the larger blades (16" and larger)during the sale.
|
|
Tommy
Administrator
Member since January 2013
Posts: 12,993
|
Post by Tommy on Jul 21, 2014 10:13:16 GMT -5
John, what's the difference between the Gemking MK-301 and the Barranca 301?
|
|
|
|
Post by johnjsgems on Jul 21, 2014 17:11:18 GMT -5
One has an MK label and the other a BD label. They have same part numbers. When I became a BD dealer they gave me a roll of MK labels in case someone insisted on an MK blade. BD is the lapidary division of MK and they share many products. When I was an HVAC guy when we installed a Day & Night AC it came with an envelope of labels including Day & Night, Bryant, and Payne. Some contractors would offer three brand options at three prices. "For a little more you can have a Payne". Nothing to do with blades but when you get old you remember all kinds of weird stuff.
|
|
|
|
Post by johnjsgems on Jul 21, 2014 17:16:35 GMT -5
Maybe through August all 16" and larger 303 and 301 blades my regular 30% discount and free shipping in lower 48 to RTH. That would be a $20-$25 additional discount with FedEx shipping and BD's $6 handling charge.
|
|
