|
|
Post by Drummond Island Rocks on Jan 20, 2015 18:30:33 GMT -5
I am real happy with the way these cabs turned out and everything ended up just as I had envisioned when I ordered the rough but now I might unwrap at least one and do it again with twisted wire so the wire will have some sparkle to match the stone. The sides and back are high polish and I just knocked off the edge at the cab face to avoid any sharp spots with the druzy crystals. wrap #1   wrap #2   and here is the rough I started with  Chuck |
|
riverrock
fully equipped rock polisher
Member since April 2010
Posts: 1,395
|
Post by riverrock on Jan 20, 2015 18:54:04 GMT -5
I like the before and after shots.
|
|
|
|
Post by orrum on Jan 20, 2015 20:46:08 GMT -5
Nice druzy, I have tried but failed to cab it.
|
|
everready
off to a rocking start
Member since November 2014
Posts: 4 
|
Post by everready on Jan 20, 2015 22:07:08 GMT -5
I am real happy with the way these cabs turned out and everything ended up just as I had envisioned when I ordered the rough but now I might unwrap at least one and do it again with twisted wire so the wire will have some sparkle to match the stone. The sides and back are high polish and I just knocked off the edge at the cab face to avoid any sharp spots with the druzy crystals. wrap #1 wrap #2 and here is the rough I started with Chuck |
|
|
|
Post by snowmom on Jan 21, 2015 5:56:30 GMT -5
cool! not sure I have ever seen it done like that... unique and beautiful!
|
|
matt2432
starting to spend too much on rocks
Member since December 2014
Posts: 171
|
Post by matt2432 on Jan 21, 2015 8:22:01 GMT -5
Very cool. I've never seen one left rough like that
|
|
