Post by chassroc on Mar 8, 2015 13:02:18 GMT -5
I have a Craftool 10 inch lapidary unit for sale. I includes a grinder, lapidary saw, motors, and a water recycler.
The grinder has 4 wheels, The left two are coarse and medium SC. The third is a sanding wheel and the fourth is a buffing wheel. On the right side is a ten inch backing wheel for glued on paper. It is powered by a 1/3 HP Dayton motor on a swinging motor bracket with it's own switch. At some point I replaced the overhead plastic. The grinder includes an adjustable cabochon rest.
The Lapidary saw is ten inch. It too is powered by a 1/3 HP Dayton motor on a swinging motor bracket with it's own switch. A rock clamp and feed weight is included. There is a drainage plug in the coolant reservoir.
A recycling tank feeds a three valve assembly on the grinder.
Everything is mounted on and in a metal cabinet.
This would be better for local pickup, especially if you want everything including the cabinet, coolant recycling tank, the saw, the grinder and the two motors. Otherwise shipping is most likely too high ... and the packaging too tricky.
Let me know if you are interested
Charlie
The grinder has 4 wheels, The left two are coarse and medium SC. The third is a sanding wheel and the fourth is a buffing wheel. On the right side is a ten inch backing wheel for glued on paper. It is powered by a 1/3 HP Dayton motor on a swinging motor bracket with it's own switch. At some point I replaced the overhead plastic. The grinder includes an adjustable cabochon rest.
The Lapidary saw is ten inch. It too is powered by a 1/3 HP Dayton motor on a swinging motor bracket with it's own switch. A rock clamp and feed weight is included. There is a drainage plug in the coolant reservoir.
A recycling tank feeds a three valve assembly on the grinder.
Everything is mounted on and in a metal cabinet.
This would be better for local pickup, especially if you want everything including the cabinet, coolant recycling tank, the saw, the grinder and the two motors. Otherwise shipping is most likely too high ... and the packaging too tricky.
Let me know if you are interested
Charlie
