|
|
Post by cobbledstones on Jul 24, 2015 17:59:49 GMT -5
I wasn't sure if this would work, but I had to try. I had a really solid piece of Rio Grand Agate from Mel, so I started drilling
To work with the pen kit, the layer of stone has to be about 1mm thick. To be safe I used a really ample amount of epoxy and did all of the shaping on the 220 wheel.
Luckily, you can hide one slip beneath the pen clip
thanks for looking |
|
NDK
Cave Dweller 
Member since January 2009
Posts: 9,440
|
Post by NDK on Jul 24, 2015 18:22:01 GMT -5
Now THAT is a lesson in patients!
Superb craftsmanship.
|
|
|
|
Post by orrum on Jul 24, 2015 19:53:55 GMT -5
Definitely way out there and a good looking job!
|
|
Mark K
Cave Dweller
Member since April 2012
Posts: 2,816 
|
Post by Mark K on Jul 24, 2015 20:31:42 GMT -5
You should try it with LS or Lace.
|
|
rockroller
spending too much on rocks
Be excellent to each other.
Member since October 2013
Posts: 359
|
Post by rockroller on Jul 24, 2015 22:33:50 GMT -5
That is a great idea! Not really sure how you pulled that one off, but I wish I had a pen with some stone.
~Roland
|
|
