rayblank
off to a rocking start
Member since July 2016
Posts: 1
|
Post by rayblank on Jul 7, 2016 15:50:27 GMT -5
I recently purchased this Nelson Machine Works belt sander and can't find any 3in x 60in belts. I tried to post a picture but got a message stating it was to big.The machine is immaculate! It came with a few belts of different manufactures but they are worn out. I bought it for making knives due to the water feature that keeps the belts wet. It is mod 330 with a Sn 735. I can email pics but can't get them to load on this forum. If anyone has info on this, I would love to hear from you.
|
|
|
Post by rockpickerforever on Jul 7, 2016 16:28:31 GMT -5
I recently purchased this Nelson Machine Works belt sander and can't find any 3in x 60in belts. I tried to post a picture but got a message stating it was to big.The machine is immaculate! It came with a few belts of different manufactures but they are worn out. I bought it for making knives due to the water feature that keeps the belts wet. It is mod 330 with a Sn 735. I can email pics but can't get them to load on this forum. If anyone has info on this, I would love to hear from you.
What type of abrasive belts are you looking for? Forget what machine you will be using them on, just look for the belt size - Sanding belts
Grainger, Home Depot, lots of places carry them. Or you can buy them online.
As for loading photos, this site does not allow you to load them directly. You need to us Photobucket or Flicker, then just insert the BB codes. Info on adding photos HERE .
Lots of information on who to post and where to post in the Welcome to RTH thread.
Welcome aboard, lots of solid information and fun members here. Be sure to introduce yourself (in the Visitors and Members Section ), tell us a little bit about yourself, and what you like to do. Jean
|
|
|
Post by spiceman on Jul 7, 2016 22:11:15 GMT -5
Myself, look at Amazon .com It searches around for you. Or maybe even look into making them yourself. Whatever works best for you. Dale
|
|
|
Post by glennz01 on Jul 8, 2016 2:40:08 GMT -5
Nelson has great stuff although the tech is old the grade is commercial. If they were nelson specific (probably not) then belts may be hard to come by.
|
|
Deleted
Deleted Member
Member since January 1970
Posts: 0
|
Post by Deleted on Jul 9, 2016 13:47:12 GMT -5
Why is this in the welcome forum?
|
|
vwfence
has rocks in the head
Member since January 2013
Posts: 564
|
Post by vwfence on Jul 10, 2016 9:54:48 GMT -5
try Rockler Woodworking Supplies
|
|